Calibration; Cleaning; Abnormal Conditions - LeCroy SDA Operator's Manual

Serial data analyzer
Table of Contents

Advertisement

Calibration

The recommended calibration interval is one year and should be performed by qualified
personnel only.

Cleaning

Clean only the exterior of the instrument, using a damp,
soft cloth. Do not use chemicals or abrasive elements.
Under no circumstances allow moisture to penetrate the
instrument. To avoid electrical shock, unplug the power
cord from the AC outlet before cleaning.

Abnormal Conditions

Operate the instrument only as intended by the
manufacturer.
If you suspect the scope's protection has been impaired,
disconnect the power cord and secure the instrument
against any unintended operation.
The scope's protection is likely to be impaired if, for
example, the instrument shows visible damage or has
been subjected to severe transport stresses.
Proper use of the instrument depends on careful
reading of all instructions and labels.
SDA-OM-E Rev H
SDA Operator's Manual
WARNING
Electrical Shock Hazard! No
operator serviceable parts inside. Do
not remove covers.
Refer servicing to qualified
personnel.
WARNING
Any use of the scope in a manner
not specified by the manufacturer
may impair the instrument's safety
protection. The instrument and
related accessories should not be
directly connected to human
subjects or used for patient
monitoring.
47

Advertisement

Table of Contents
loading

Table of Contents