Agilent Technologies InfiniiVision 2000 X-Series User Manual page 271

When accessing the password protected oscilloscope, the user name is the
IP address of the oscilloscope.
To reset the
Do one of these things to reset the password:
password
• Using the keys on the front panel of the oscilloscope, press [Utility] > I/O
• Using the web browser select the Configure Network tab, select Modify
Agilent InfiniiVision 2000 X-Series Oscilloscopes User's Guide
> LAN Reset.
Configuration, erase the Password, and select Apply Changes.
20
Web Interface
Enter
password
271