Manual No. 25-ULGPMU01-01
CCD Scanner
C.) Installation – USB Interface
Plug the scanner into the USB connector on your host computer. PC must be running Windows 98 or higher or
iMac Rev A or higher. The computer will sense the presence of the scanner and load any required software drivers
automatically.
Reset All Defaults - USB Interface
Our scanners are shipped with factory default settings that represent the settings most commonly used by our
customers. In most applications, the scanner will work right out of the box without any need for additional
programming. At any time you can return the scanner to the factory default settings by scanning the "Reset all
Defaults" programming bar code below.
Start
ZZ
Program
Menu
SU
USB
End
ZZ
Program Menu
Series OPT Handheld
-[[-
-TV-
-[[-
Page 11