Craftsman 171.264630 Owner's Manual page 7

9-25188 Router Table Switch
• Switch mounts to the front of all Craftsman
router tables
• Front switch operates two receptacles on the
back of the switch
• Large switch paddle for ease in turning the
switch OFF
• Removable key prevents unauthorized use
when removed from the switch
• Has built-in circuit breaker
9-25468 Craftsman Guide Master Router Table
Push Shoe with Hold Down Stick
• Ideal for handling small work pieces on a
router table
• Aids in accurate measurement and router table
set-up
• Transforms into a miter gauge
• Provides a quick set-up for making 1/2" sliding
dovetail joints
9-26479 Craftsman Professional Large Router
Adapter Plate
• Molded glass-filled polycarbonate plastic
adapter plate mounts most non-Craftsman
routers to the 171.264630 and the
171,264640 Professional Router Tables
• Easy to follow instructions and mounting
templates supplied
• Adapter plate mounts to the router table using
fasteners supplied with router table
• Fasteners for mounting the router to the
adapter plate are not included and must
obtained separately
IMPORTANT NOTE: The drilling and the
countersinking of holes in the adapter plate
are necessary in order to mount the router
to the adapter plate. The screw heads must
be slightly below the top surface of the
adapter plate.
9-26473 Craftsman Bit Storage Panel
• Easy snap-in installation
• Provides easy and convenient storage for up to
18 router bits
• Holds a mix of both 1/4" and 1/2" shank
router bits
9-26471 Craftsman Feather Board
• Mounts to 171.264630 and the 171.264640
Professional Router Tables only; cannot
be used on any other Craftsman or
non-Craftsman router tables
• Feather boards apply pressure to a workpiece
vertically down towards the table top and
or sideways towards the router table fence pro-
viding better control of the work piece
• Adjustable for both small and large
work pieces
• Not to be used on any other type of machinery
or accessory
9-26472 Precision Router Table Fence Assembly
• Mounts to all Craftsman Professional
Router Tables
• Extruded aluminum fence is fully adjustable
measuring 4" high and 27" long
• Fence opening is adjustable for different size
router bits providing greater support
• Exclusive "keyed"jointing feature straightens
workpiece edges for gluing
• Fence assembly has 2-1/2" diameter dust port
for wetJdry vacs with 2-1/2" diameter hoses
• Clear see through guard allows viewing of
the work area
• Incorporates T-slot design for mounting
feather boards
9-26477 Craftsman Enclosure Kit
• Converts the 9-26478 Craftsman Floor Stand
to a convenient storage cabinet
• Includes three panels, door, hinge, magnetic
latch, knob, and mounting hardware
9-26478 Craftsman Floor Stand
• Places router table at optimal working height
• Adjustable non-slip foot pads for leveling table
on uneven floor surfaces
• Two heavy-duty steel shelves for storage
• Will accept all Craftsman bench top router
tables available after 1997