STEP 14: (Figure 6)
Place the vinyl canopy on top of the tubing frame, fitting
the front of the vinyl canopy around the front U-tube.
Secure the nylon mesh to the upright tubes using the ties
located on the corners of the mesh.
Make sure tractor seat raises
and lowers freely after attaching Sun
Shade. The tractor's operator presence
safety switch will not operate if seat is
Read this owner's manual and safety rules before operating
your tractor with the sun shade.
This sun shade does not provide
protection against exhaust fumes, collision,
rollover or other accidents.
CAUTION: Watch out for low tree limbs and
other overhead objects which may interfere
with the sun shade.
Check the area of operation thoroughly before using the
tractor with the sun shade. The added height of the sun
shade and a reduced field of vision require extra caution
Remove the upper sun shade frame and canopy before
you transport the tractor in an open truck or open trailer.
Never transport the tractor in an
open truck or open trailer while the sun shade
Read and follow the maintenance schedule and the maintenance procedures listed in this section.
Before each use make a thorough visual check of the sun
shade for any bolts and nuts which may have loosened.
Retighten any loose bolts and nuts.
Wipe loose dirt and debris from the vinyl canopy after
each use. The vinyl canopy can be washed using mild
liquid soap and water.
Clean the vinyl canopy thoroughly with mild liquid soap
and water. Allow to dry before storing.
Store the sun shade in a clean, dry area away from direct
for missing parts or assembly help
DO NOT RETURN TO STORE