Drill a hole at each of the marked locations.
Place the router table on the work surface,
and align the holes in the table
legs with the holes in the work surface.
Secure the router table to the work surface
using four screws (not supplied).
Securely tighten the screws.
has a safety key to help prevent accidentally
the router ON
and the unauthorized,
use by others.
The safety key must be completely
into the switch before the switch can
be turned ON.
To operate the switch:
1. Insert the safety key into
the switch. (Fig. 9)
2. To turn the router ON,
pull out the ON/OFF