To Store Your Accessories; Moving The Vac; Blowing Feature - Craftsman 113.170160 Owner's Manual

Operation (continued)
To Store Your Accessories
1. Slide extension handles and accesso-
ries onto the posts of the caster feet
for storage,
2. To remove the accessories, lightly
rotate and pull upward.
Moving the Vac
Should it become necessary to pick the
vac up to move it, use the handles on the
sides of the dust drum.
Handle
/
Blowing Feature
Your new Craftsman wet/dry vac features
"Switchable Blowing"using the "Pos*l-Lock "TM
hose featum.
"Switchable Blowing" allows you to use
your vac for either suction or blowing. Nor-
mal use of your wet/dry vac is to use the
vac for cleaning up dirt and debris. With
this new feature, your vac is quieter
because the blowing port is closed while
the unit is used for vacuuming. The blow-
ing air is exhausted through the exhaust
filter access door.
I ARNING: Always wear safety gog-
gles complying with ANSI Z87.t
before using as a blower.
I ARNING: To avoid injury to
bystanders, keep them clear of
blowing debris.
If you wish to convert from suction to
blowing.
Simply press the locking tab on the hose
and remove the hose from the inlet port.
Insert the hose in the blowing port on the
rear of the vac and your vac is ready to
use as a blower.
To obtain more air movement with this
blowing feature, purchase a 9-16933
"Blower Nozzle" and the force of air will
move the debris better.
Blower _
Nozzle --.,_.._
(Optional) _
10