See Figure 10, page ii.
In the event the fuse in the canister vac blows, it will need
to be replaced. Look for replacement fuses where you
purchased this product.
Remove the battery pack from the canister vac to ac-
cess fuse housing.
Remove the current fuse and discard. Use a pair of
fuse pullers if necessary.
Use only 30 amp JAT blade type automotive fuse to re-
place the blown fuse. If canister vac still will not work,
take it to an authorized service center for repair.
STORAGE (1 MONTH OR LONGER)
Clean all foreign material from the canister vac.
Empty the collection container before storage.
Store indoors in a place that is inaccessible to chil-
dren. Keep away from corrosive agents such as garden
chemicals and de-icing salts.
The following recommended accessories are currently available at retail stores:
Wet Use Foam Filter
Dry Use Filter
not use any attachments or accessories not recommended by the manufacturer of this tool. The use of attachments
or accessories not recommended can result in serious personal injury.
Current attachments and accessories available for use with this tool are listed above. Do
BATTERY PACK REMOVAL AND PREPARATION
battery pack's terminals with heavy-duty adhesive
tape. Do not attempt to destroy or disassemble
battery pack or remove any of its components.
Nickel-cadmium batteries must be recycled or
disposed of properly. Also, never touch both termi-
nals with metal objects and/or body parts as short
circuit may result. Keep away from children. Failure
to comply with these warnings could result in fire
and/or serious injury.
10 - English
Upon removal, cover the