Download  Print this page

Craftsman 17761 - 16 Gal. Wet-Dry VAC Owner's Manual

16 gallon wet/dry vac
Hide thumbs

Advertisement

Save
This
Manual
For Future
Reference
S£A_RS
owner's
manual
MODEL
NO.
113.17761q
Serial
Number
Model and serial
numbers may be
found on the handle.
You should
record
both model and serial
numbers
in a safe
)lace for future use.
FOR YOUR
SAFETY
READ ALL
INSTRUCTIONS
CAREFULLY
J
CRRFTSHRN
16 GALLON
WET/DRY VAC
• assembly
• operating
• repair parts
Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.
Part No. SP6502
Printed in U,S.A.

Advertisement

loading

  Related Manuals for Craftsman 17761 - 16 Gal. Wet-Dry VAC

  Summary of Contents for Craftsman 17761 - 16 Gal. Wet-Dry VAC

  • Page 1 Save This Manual For Future Reference S£A_RS owner's manual MODEL 113.17761q CRRFTSHRN Serial Number Model and serial 16 GALLON numbers may be found on the handle. You should record WET/DRY VAC both model and serial numbers in a safe )lace for future use. •...
  • Page 2 WET/DRY VACS If this Craftsman Wet/Dry Mac fails due to a defect in material or workmanship within one year from the data of purchase, return it to your nearest Sears Store, and it will be replaced or repaired, at Sears option, free of charge.
  • Page 3 To reduce the risk of injury from accidental To reduce the risk of falls, use extra care starting, unplug power cord before when cleaning on stairs. changing or cleaning filter. This Wet/Dry Vac is double-insulated, Do not unplug by pulling on cord.
  • Page 4: Components View

    Introduction This Wet]Dry Vac is intended for house- Owner's Manual Contents hold use only. Item Page Warranty Information ....IMPORTANT NOTE Safety Instructions ....Please Read Carefully Introduction ..... Static Shocks Common - In dry Unpacking and Checking Carton Contents ....areas or when the relative humidity of the air is low.
  • Page 5: Assembly

    Replacement Filter Assembly WARNING: For your safety, WARNING: To avoid personal Injury never connect plug to power source or damage to vac be sure to keep outlet until all assembly steps are hands, fingers, or any other foreign complete and you have read and objects...
  • Page 6: Caster Foot Assembly

    Caster/Caster Foot Assembly 1. Remove the power assembly from the dust drum and set aside. 2. Turn the dust drum upside down on the floor. 3. Insert the caster feet into the bottom of drum, as shown (4 places). 4. Push on the caster foot until the foot is flush with bottom of the dust drum.
  • Page 7 Vac Assembly (continued) Cord Wrap Press The wet/dry vac has a convenient cord Pull wrap area designed on the rear of the vac. Simply, wrap the power cord around the push/pull handle and cord wrap, then snap the connector on the plug to a wrap of the cord.
  • Page 8: Operation

    Canada, CSA A94.3-99) shown through the vac will help dry the filter. Package before commencing optional Craftsman HEPA Rated operation. Safety Goggles Material Filter, stock number 9-17912 will available at many local retail stores. do a better job stopping the very fine particles than the 9-17816 filter.
  • Page 9: Emptying Drum

    Operation (continued) Emptying the Drum WARNING: To reduce risk of injury to bystanders, keep them clear WARNING: To reduce the risk of of blowing debris. injury from accidental starting, unplug power cord before emptying 1. Locate blowing port of your vac. the drum.
  • Page 10: Cleaning

    Maintenance IMPORTANT: To reduce risk of Filter damage to the blower wheel and motor, WARNING: To reduce risk of j always reinstall the filter before using the injury from accidental starting, vac for dry material pickup. unplug power cord before changing Filter or cleaning filter.
  • Page 11 Maintenance (continued) Wet Nozzle with the pins fittingthrough the matching holes in the squeegee. (Make sure the new To pick up liquids off a smooth surface, workingedge is located farthest from you.) use the 2-1/2" nozzle accessory supplied with your wet/dry vac. To use this nozzle, simply attach the nozzle to the end of an extension wand.
  • Page 12: Repair Parts

    Repair Parts 16 Gallon Wet/Dry Model Number 113.177610 Always order by Part Number - Not by Key Number WARNING SERVICING OF DOUBLE-INSULATED WET/DRY In a double-insulated Wet/Dry Vac, two systems of insulation are provided instead of grounding. No grounding means is provided on a double-insulated appliance, nor should a means for grounding be added.
  • Page 13 Repair Parts 16 Gallon Wet/Dry Vac Model Number 113.177610 21,_...
  • Page 14 Notes...
  • Page 15 Notes...
  • Page 16 For in-home major brand repair service: Call 24 hours a day, 7 days a week 1-800-4-MY-HOME (1-800-469-4663) Para pedir servicio de reparaci6n a domicilio - 1-800-676-5811 For the repair or replacement parts you need: Call 6 am - 11 pm CST, 7 days a week PartsDirect 1-800-366-PART (1-800-366-7278)

This manual is also suitable for:

113.177610