For Recycling - Craftsman 315.101540 Operator's Manual

[] hsertthehexkeyin chuckandtighten the chuck
jawssecurely. Tapsharply witha mallet i n a counter-
clockwise direction. Thiswil!loosen thechuckonthe
spindle. H t c annowbeunscrewed b yhand.
Fig.12
TO RETmGHTEN A LOOSE CHUCK
The chuck may become loose on the spindle and develop
a wobble. Periodically check the chuck screw for tight-
ness.
[] Lock the switch trigger by placing the direction of rota-
tion selector in center position.
[] Open the chuck jaws.
[] hsert the hex key into the chuck and tighten the chuck
jaws securely. Tap the hex key sharply with a mallet in
a clockwise direction. This win tighten the chuck on the
spindle.
[] Open the chuck jaws and remove the hex key.
[] Tighten the chuck screw.
NOTE: The chuck screw has left hand threads.
The battery pack for this tool is equipped with nickel-
cadmium rechargeable batteries. Length of service from
each charging will depend on the type of work you are
doing.
The batteries in this too! have been designed to provide
maximum trouble-free life. However, like all batteries, they
wil! eventually wear out. Do not disassemble battery pack
and attempt to replace the batteries. Handling of these
batteries, especially when wearing rings and jewelry, could
result in a serious burn.
To obtain the longest possible battery life, we suggest the
fol!owing:
[] Remove the battery pack from the charger once it is
fully charged and ready for use.
For battery pack storage longer than 30 days:
[] Store the battery pack where the temperature is below
80°F.
[] Store battery packs in a "discharged" condition.
BATTERY PACK REMOVAL AND
PREPARATION FOR RECYCLING
To preserve natural resources, please
recycle or dispose of batteries
properly.
This product contains nickel-cadmium
batteries. Local, state or federal
laws may prohibit disposal of nickel-
cadmium batteries in ordinary trash.
Consult your Ioca! waste authority for information
regarding available recycling and/or disposal options.
_ WARMNG: Upon removal, cover the battery pack's
terminals with heavy-duty adhesive tape. Do not
attempt to destroy or disassemble battery pack or
remove any of its components. Nicke!-cadmium
batteries must be recycled or disposed of properly.
Also, never touch both terminals with metal objects
and/or body parts as short circuit may result. Keep
away from children. Failure to comply with these
warnings could result in fire and/or serious injury.
17