Advertisement
BAI"rERIES
Yourddll-driver's b attery packis equipped w ith12
nickel-cedmium r echargeable batteries. Length of
service fromeachcharging willdepend onthetypeof
workyouaredoing.
Thebatteries in
this tool have been designed to
provide maximum trouble free life. However, like all
battedes, they will eventually wear out. Do not
disassembte battery pack and attempt to replace the
battedes. Handling of these batteries, especially when
wearing dngs and jewelry, could result in a sedous
bum.
To obtain the longest possible battery life, we suggest
the following:
•
Store and charge your battedes in a cool area.
Temperatures above normal room temperature
will shorten battery life.
•
Never store battedes in a discharged condition.
Recharge them immediately after they are
discharged.
••
All batteries gradually lose their charge. The
higher the temperature the quicker they lose their
charge. If you store your tool for long pedods of
time without using it, recharge the batteries every
month or two. This practice will prolong battery
life.
To preserve natural resources, please
recycle or dispose of expired battery
pack properly.
This product contains nickel-cadmium
battery. Must be disposed of properly.
Local, state, or federal laws may
prohibit disposal of nickel-cadmium
batteries in ordinary trash. Consult
your local waste authority for
information regarding available
recycling and/or disposal options.
BA'n'ERY
PACK
REMOVAL
AND
PREPARATION
FOR RECYCLING
A
WARNING:
Upon removal, cover the battery
pack's terminals with heavy duty adhesive tape.
Do not attempt to destroy or disassemble battery
pack or remove any of its components. Nickel-
cadmium batteries must be recycled or disposed
of properly. Also, never touch both terminals with
metal objects and/or body parts as short circuit
may result. Keep away from children. Failure to
comply with these wamings could result in fire
and/or serious injury.
OVERLOAD
Your drill has a built-in overload protector to protect
the motor during overloading or prolonged use. The
overload protector automatically activates to break the
circuit. When this occurs, allow your drill to cool a few
seconds before resuming operation.
14
Advertisement
