Download Print this page

Craftsman 315.115810 Operator's Manual

1/2 in., 19,2 volt cordless drill-driver variable speed/reversible
Hide thumbs

Advertisement

Quick Links

MANUAL
® !
1/2 in., 19,2 VOLT CORDLESS DRULL-DRIVER
VARIABLE SPEED/REVERSIBLE
Model No.
315.115810
•t_ WARNING: To reduce the risk of injury,
the user must read and understand the
operator's manual before usingthis
product.
BATTERIES AND CHARGERS
SOLD SEPARATELY
Customer Help Line: 1-800-932-3188
Sears, Roebuck and Co., 3333 Beverly Rd., Hoffman Estates, IL 60179 USA
Visit the Craftsman web page: www.sears.com/craftsman
983000-880
"[0-_3-05 (REV_'00)
Save this manual for future reference

Advertisement

loading

  Also See for Craftsman 315.115810

  Related Manuals for Craftsman 315.115810

  Summary of Contents for Craftsman 315.115810

  • Page 1 Customer Help Line: 1-800-932-3188 Sears, Roebuck and Co., 3333 Beverly Rd., Hoffman Estates, IL 60179 USA Visit the Craftsman web page: www.sears.com/craftsman 983000-880 Save this manual for future reference "[0-_3-05 (REV_'00)
  • Page 2 If this Craftsman tool falls to give complete satisfaction within one year from date of purchase, RETURN IT TO ANY SEARS STORE OR OTHER CRAFTSMAN OUTLET IN THE UNITED STATES FOR FREE REPLACEMENT. tf this Craftsman tool is used for commercial or rental purposes, this warranty applies for only 90 days from the date of purchase, This warranty gives you specific legal rights, and you may also have other rights which vary from state to state, Sears, Roebuck and Co., Dept.
  • Page 3: Work Area Safety

    El Use safety equipment. Always wear eye protection. WARNING! Read all instructions. Failureto follow Sa_eti equipment such as d_ mask, non-skid safety all instructions listed below may result fn electric shoes, hard hat, or hearing protection used for appro- shock, fire and/or serious tnlury_ The term "power priate conditions wi[_ reduce personal i_juries_ toot"...
  • Page 4 1_Use make a connectionfrom one terminal to another. the power tool, accessoriesand tool bits etco, in accordance with these instructionsand in the Shorting thebatteryterminals togethermay cause bums or a fire° manner intendedfor the particulartype of power tool, taking into accountthe working condffions la Under abusiveconditions,liquidmay be ejected and the work to be performed.Use of the power from the battery, avoid contact.
  • Page 5 An extension cord should not be used unless WARNING! READAND UNDERSTAND ALL INSTRUCTIONS_Failureto follow all instructions absolutely necessary° Use of improper extension cord could result In a risk of fire and electric shock If listed below, may resultin electric shock, fire extension cord must be used, make sure;...
  • Page 6 Some of the following symbols may be used on this tool. Please study them and learn their meaning.. Proper interpretation of these symbols wil! allow you to operate the tool better and safer.. DESIGNATION/EXPLANATION SYMBOL NAME Volts Voltage Current Amperes Hertz Frequency (cycles per second) Watt...
  • Page 7 The following signal words a nd meanings areintended toexplain thelevels o frisk associated with this producK SYMBOL SIGNAL MEANING DANGER: Indicates an Imminently hazardous situation, which, tf not avoided, will result in death or serious injury. WARNING: Indicates a potentially hazardous situation, which, if not avoided, could result In death or serious Injury.
  • Page 8 PRODUCT SPECIFICATIONS Clutch ..............24 Position Chuck ............t/2 in° Keyless Motor ............... 19.2 Volt DC Torque ............ Maximum 420 in lb° Charger Input ........1201/, 60 Hz, AC only Switch .............. Variable Speed Charge Rate ................1 hour Gear Train ................2 Speed No Load Speed ..........
  • Page 9: Led Worklight

    LED WORKLIGHT KNOW YOUR DRILL-DRIVER See Figure 1. The LEDworkligh_;, 3oca_ed on the front of the toolbase, illuminates when the switch trigger isdepressed° T his Before attempting to use this product, familiarize yourself provides extra fight for increased visibirity with aff operating features and safety rufes_ LEVELS AUXILIARY HANDLE...
  • Page 10: Charging The Battery Pack

    CHARGING A COOL BATTERY PACK WARNING: Do not allow familiarity wffh too_s to _fbattery pack is below norton) temperature range, the make you careless. Remember that a careless green LED on charger wil) come on. A_)ow battery pack to fraction of a second is sufficient to inflict serious reach normal temperature, then the red LED will come on.
  • Page 11: Battery Pack

    CHARGING A HOT BATTERY PACK TO INSTALL BATTERY PACK See Figure 3, When using the tool continuously, the batteries in the u Lock switch trigger on the ddlf by placing the direction battery pack will become hot. You should let a hot battery of rotation selector In center position.
  • Page 12 To stop the ddll, release the switch trigger and allow the WARNING: Battery tools are always in operating chuck to come to a complete stop. condition° Therefore, switch should always be locked NOTE: The drill will not run unless the direction of rotation when not in use or carrying at your side°...
  • Page 13 TO DECREASE KEYLESS CHUCK TORQUE See Figure 6, AI)JUSTING FtlHG The drill has a keyless chuck to tighten or release ddl] bits in the chuck jaws. The arrows on the chuck indicate which direction to rotate the chuck body In order to LOCK (tighten} or UNLOCK (reTease)the driTIbiL WARN|NG: Do not hold chuck body with one hand...
  • Page 14 BIT STORAGE CHUCK COLLAR See Figure9. When not in use, bits provided with the drill can be placed in the storage arealocatedon the base of the drill. SCREWDRIVER LOCI( (TIGHTEN) CHUCK BODY RIGHT Fig° 10 Btf STORAGE AREA Fig, 9 INSTALLING BITS See Figures 10 - 11.
  • Page 15 LEVEL ADJUSTING THE AUXILIARY HANDLE ASSEMBLY See P3gure I2. m Loosen the auyJliary handle assembly by turning the knob counterdockwise, B Rotate the auxiliary handle assembly to the desired location° u Tighten the auxiliary handle assembly securely by turn- ing the knob c]ockwise_ TORQUE AUXILIARY ADJUSTMENT...
  • Page 16: Chuck Removal

    MALLET WARNING: When servicing, use only idenfica} Craftsman replacement parts. Use of any other part may create a hazard or cause product damage, WARNING: A)ways wear sa_e_ygoggles or safety glasses with side shields when using compressed air to ctean tools if the operation is dusty, also wear a...
  • Page 17 m Insert the hex key into the chuck and tighten the TO RETIGHTEN A LOOSE CHUCK chuck jaws securely. Tap sharply'_ith a mailer in a The chuck may become loose on the spindle and deveJop counterclockwise direction. This will ioosen the chuck a wobbte Also, the chuck screw may become loose, on the spindle°...
  • Page 18: Parts List

    CRAFTSMAN 19=2 VOLT CORDLESS DRILL-DRWER MODEL NO. 315.115810 model number will be lound on a plate attached to the motor housing_ Always mention the model l,number in all correspondence regarding your CORDLESS DRILL-DRIVER or when ordering repair parts, J SEE BACK PAGE FOR PARTS ORDERING INSTRUCTIONS i i ..