Table of Contents
Advertisement
Available languages
Available languages
Solving
d ying
p ob ems
Have your clothes been over-dried? Choose a lower dryness setting.
Haveyou used fabric softener? Placefabric softener sheets in the dryer.
Has the load been over-dried?
Choose a lower dryness setting.
Is tumble-drying
recommended?
Check care labels inside garments.
If you selected TIME DRY - did you set it to dry for too long?
Has the correct temperature
been used to dry the garment? Check the care label.
Does the load sit higher than the lint bucket? Your dryer is over-loaded,
decrease the load
size.
Did you remove },our clothes as soon as the dryer was finished?
Use the WRINKLE FREE
option,
if you cannot return to the dryer in time.
Have your clothes been over-dried?
Select a lower dryness level. Check your garments
care-
labels.
Is the electrical
cord plugged
in? If not, plug the cord in and switch power on.
A power failure may have occurred. Please refer to page 52 for more information,
or contact
your Fisher & Paykel Authorised
Service Agent.
Is the WRINKLE FREEoption
selected? Press START/PAUSE to open the lid.
Your dryer may be experiencing
a low voltage
supply. Without
enough
electricity
it cannot
function.
Once the line voltage
returns to normal the dryer will recommence
the interrupted
cycle. If the problem
persists call for service.
Advertisement
Table of Contents
