Table of Contents
Advertisement
Available languages
Available languages
nsta ation
i structions
Location requirements
The area in which the dryer is located must be
kept clear and free from combustible
materials,
gasoline and other flammable
vapors and
liquids. A dryer produces combustible
lint so the
area around the dryer must be cleaned regularly
to keep it free of lint,
Fig.3 Reer venting
This dryer can only be vented from the rear and must be exhausted
to the outdoors.
Alcove
or closet installation
When installing a dryer in a closet!alcove it must be exhausted to the outdoors° No other
fue_ burning appliance can be installed in the same closet or akoveo
The top opening area in the door must be a minimum
of 48 square inches (31 O0 mm 2) and the
bottom
opening
area must have a minimum
of 24 square inches (1550 ram2). These openings
must never be obstructed
(a [ouvred door with the minimum
air opening is acceptable).
Minimum
installation
clearances are required but more clearance is recommended.
Advertisement
Table of Contents
