Fisher & Paykel AeroSmart DG27C Installation Instructions And User Manual page 22

nsta ation instructions
Grounding instructions for gas and electric dryers
Electrical Shock Hazard
Make sure appliance is wired or plugged into a grounded outleto
Do not use an adaptor.
Do not use an extension cord.
Failure to follow these instructions can result in death, fire, or electrical
shock.
i
Electrical Shock Hazard
Check with a qualified electrician or serviceperson if you are in doubt as to
whether the appliance is propedy grounded.
Do not modify the plug if it will not fit the outbto
Have the proper out_et installed by a qualified e[ectriciano
Failure to follow these instructions can result in death, fire, or electrical
shock.
Grounding for a cord_connected appliance
This appliance must be grounded. In the event of malfunction or breakdown, grounding will
reduce the risk of electric shock by providing a path of least resistance for electric current.
When this appliance is equipped with a cord having an equipment-grounding conductor and a
grounding plug, the plug must be plugged into an appropriate outlet that is properly installed
and grounded in accordance with all local codes and ordinances, or in their absence, with the
National Electrical Code ANSI/NFPA 70, or the Canadian Electrical Code, CSA C22.1. Do not cut or
remove the grounding prong from this plug.
_mproper connection of the equipment-grounding
conductor can result in a risk of e_ectric shocks Check with
a qualified e_ectrician or service representative if you are in
doubt as to whether the appliance is properly grounded°
Refer to pages 21 - 27 for wiring details for electric dryers.