Table of Contents
Advertisement
Available languages
Available languages
nsta ation
instructions
FqT[
Exhaust venting
Fke Hazard
Use heavy metal exhaust
duct°
Do not use a p_astic exhaust
duct°
Do not use thin meta_ foi_ exhaust
duct°
Failure to do so can result in death
or fire°
1
Read the exhaust section (pages 12 - 15) before installing
the exhaust system to determine
the
maximum
allowable
exhaust duct length.
Do not use sheet metal screws when assembling
duct[ng. Always use suitable duct tape.
Never use plastic or thin metal foil flexible exhaust material
2
The exhaust outlet is located close to the center of the rear of the dryer. Make sure you join the
exhaust duct to the dryer with duct tape only. This wi[[ prevent lint and dust from escaping from
the dryer and exhaust system.
Advertisement
Table of Contents
