To Install Battery Pack; Variable Speed - Craftsman 315.114050 Operator's Manual

SWITCH
See Figure 2.
To turnyour drillON, depress the switchtrigger. To turn it
OFF, release the switchtrigger.
FORWARD/REVERSE
SELECTOR
TO INSTALL BATTERY PACK
• Lockswitch triggeron your drillby placingthe direction
of rotationselectorIn center position.See Figure 3,
• Place battery pack In your ddlLAlign raised db on
battery packwith groove insideddlL See Figure3.
VARIABLE SPEED
SWITCH TPJGGER Fig. 2
VARIABLE SPEED
This tool has a variable speed switch that delivers higher
speed and torque with Increased triggerpressure.Speed Is
controlledby the amount of switch trigger depression,
Note: You might hear a whistlingor dnglng noisefrom the
switch duringuse, Do not be concerned, this Is a normal
part of the switch function,
BATI'ERY PACK
LATCHES
_ DEPRE_ LATCHESTO
RELEASE BA'rrERY PACK
Fig. 3
• Make surethe latches on each s{de of your battery
pack snap In place and battery pack Is securedIn drill
beforebeginningoperation,
A CAUTION: When placingbattery pack In your dd[I,
be sure raised rib on battery pack aligns w_thgroove
Inside ddll and latches snap intoplace pmpady.
Improperassembly of battery pack can cause
damage to internalcomponents,
TO REMOVE BAI"rERY PACK
• Lock switch tdgger on your drillby placing the direction
of rotationselector in center position, See Figure 3.
• Locate tatohes on side of battery pack and depressto
release battery pack from your drill.See Figure 3.
• Remove battery pack from your drill
10