Craftsman 315.114050 Operator's Manual page 11

SWITCH LOCK
See Figure 4,
The switchtdgger can be locked In the OFF position.This
feature can be used to prevent the possibilityof accldental
startingwhen not in use. To lock switchtrigger, place the
directionof rotationselector (Forward/ReverSeSelector)
in center position.
SELECTOR WITH
CENTER LOCKPOSITION
REVERSE
KEYLESS CHUCK
See Figure 5.
Yourdrillhasa k_=yless c huck. As the name Impites, y ou can
handtightenor releasedrillbitsin the chuck J;tws.Graspand
holdthe collarofthe chuck withone hand. Rotatethe chuck
bodywithyourotherhand.The arrowson the chuck
Indicatewhichdirection to rotatethe chuck bodyin orderto
LOCK (tighten)or UNLOCK (release)the ddllbiL
UNLOCK CHUCK COLLAR
DI_LLBIT (RELEASE)
°
FORWARD
SWITCH TRIGGER Fig. 4
_lh WARNING: Battery toolsare always in operating
condition.Therefore, switch shouldalways be locked
when not in use or canylng at your side.
REVERSIBLE
See Figure 4.
This tool has the feature of being reversible, The direction
of rotationis controlled by a selector locatedabove the
switchtrigger, With the drill held In normal operating
position,the directionof rotationselector shouldbe
positionedto the left of the switchfor ddlllng.The drilling
direction[s reversed when the selector Is to the rightof
the switch.When the selector Is In center position, the
switch trigger is locked,
CAUTION: To prevent gear damage, always allow
chuck to come to a complete stop before changing
the direction of rotation.
To stop, release switch triggerand allowthe chuckto come
to a complete stop.
CHUCK JAW8
LOCK
('nGNTEN)
CHUCK BODY
Fig. 5
_h= WARNING: Do not holdchuck bodywith one hand
and use power of the drillto tighten chuck Jawson
drill bit. Chuck bodycould slip In your hand or your
hand could slipand come In contact with rotatingdrill
bit.This could cause an accidentresulting In serious
persona] I njury.
11