This product has been shipped completely assembled.
 Carefully remove the product and any accessories from
the box. Make sure that all items listed in the packing
list are included.
 Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
 Do not discard the packing material until you have
carefully inspected and satisfactorily
 If any parts are damaged or missing, please call
1/2 in. Drill-Driver
Battery Pack (2)
If any parts are damaged or missing
do not operate this product until the parts are re-
placed. Failure to heed this warning could result in
serious personal injury.
Do not attempt to modify this product
or create accessories not recommended
for use with
this product. Any such alteration or modification
misuse and could result in a hazardous condition
leading to possible serious personal injury.
To prevent accidental starting that
could cause serious personal injury, always remove
the battery pack from the product when assembling
Do not allow familiarity with products to
make you careless. Remember that a careless
fraction of a second is sufficient to inflict serious
Always wear safety goggles or safety
glasses with side shields when operating products.
Failure to do so could result in objects being thrown
into your eyes, resulting in possible serious injury.
Do not use any attachments
sories not recommended
by the manufacturer of this
product. The use of attachments or accessories not
can result in serious personal injury.
You may use this product for the purposes listed below:
 Drilling in wood
 Drilling in ceramics, plastics, fiberglass, and laminates
 Drilling in metals
 Mixing paint
This product will accept DieHard_ 19.2 V lithium-ion bat-
tery packs and Craftsman 19.2 V nickel-cadmium
For complete charging instructions, refer to the Opera-
tor's Manual for the battery packs and chargers listed in
the General Safety Rules.