Craftsman 113.213130 Owner's Manual page 7

unpacking and checking contents
WARNING: TO AVOID iNJURY FROM UNEX-
PECTED STARTING OR ELECTRICAL SHOCK, DO
NOT PLUG THE POWER CORD INTO A SOURCE
OF POWER. THIS CORD MUST REMAIN UNPLUG-
GED WHENEVER YOU ARE WORKING ON THE
DRILL PRESS.
Mode! 113.213130 Drift Press is shipped complete in
one box.
1. Unpacking and Checking Contents
a. Separate all "loose parts" from packaging mate-
rials and check each item with "Table of Loose
Parts" to make sure all items are accounted for.
before discarding any packing material. Some
loose parts are contained inside the belt guard.
Open the belt guard cover to find them,
WARNING: _F ANY PARTS ARE MKSSING, DO NOT
ATTEMPT TO ASSEMBLE DRILL PRESS, PLUG iN
THE POWER CORD, OR TURN THE SW_TCH ON
UNTIL THE MiSSiNG PARTS ARE OBTAINED AND
ARE INSTALLED CORRECTLY.
2. Remove the protective oil that is applied to the
table and column. Use any ordinary household type
grease and spot remover,
WARNING: TO AVOID FiRE OR TO×mC REAC-
TION, NEVER USE GASOLINE, NAPTHA OR
SIMILAR HIGHLY VOLATILE SOLVENTS.
3. Apply a coat of paste wax to the table and column
to prevent rust, Wipe at1 parts thoroughly with a clean
dry cloth.
TABLE OF LOOSE PARTS
item Description
A Tab!e
B Column SUppori Asm.
c Owner s Manual .
D Motor .......
E Bag of Loose Parts
F Base ......
G Head Asm. ..
H Box of Loose Parts
H
\
2
i
!
F
/
E