Craftsman 113.213130 Owner's Manual page 21

3. Turnthe depth scaleclockwise untilit stops,
4. Tighten the depth scalelock.
5. Thechuck willnowbeheldatthisdepth whenthe
feedhandles arereleased.
DEPTH SCALE
LOCK
REMOVING CHUCK
1. Raise the table so it is about (2) two inches below
the chuck, This will prevent the chuck falling a long
distance when it is removed.
2. Put a wrench (no longer than 11 inches) between
the chuck and spindle as illustrated.
3. While prying down on the wrench hit the side of
the chuck using a rubber or plastic hammer. It may
be necessary to hit around the chuck in several
different spots to remove the chuck.
4. To install the chuck refer to the assembly section
"Installing the chuck."
CHUCK
CHUCK
BODY
21