Craftsman 113.213130 Owner's Manual page 19

27 DRILL "ON-OFF" SWITCH . . , Has locking fea-
ture. THIS FEATURE IS INTENDED TO HELP
PREVENT UNAUTHORIZED AND POSSIBLE
HAZARDOUS USE BY CHILDREN
OTHERS.
Insert KEY into switch.
NOTE: Key is made of yellow plastic.
AND
To tum drill ON , .
Insert finger under switch lever and puli.
% ..f._-J
To turn drill OFF... Push lever in
In an emergency: .., the drill bit BINDS. , . STALLS
. , . STOPS . . . or tends to tear the workpiece loose
•. you can QUICKLY turn the dri OFF By hitting the
switch with the palm ol your hand.
To lock switch in OFF position . hotd sw_tclq IN with
one hand . REMOVE key w_ti_ other hand
WARNING: FOR YOUR OWN SAFETY, ALWAYS
LOCK THE SWITCH "OFF" WHEN DRILL PRESS IS
NOT IN USE ... REMOVE KEY AND KEEP IT IN A
SAFE PLACE . , . ALSO . . . IN THE EVENT OF A
POWER FAILURE (ALL OF YOUR LIGHTS GO OUT)
OR BLOWN FUSE OR TRIPPED CIRCUIT
BREAKER, TURN SWITCH OFF , . . LOCK iT AND
REMOVE THE KEY. THIS WILL PREVENT THE
DRILL PRESS FROM STARTING UP AGAIN WHEN
THE POWER COMES BACK ON,
/,
f
19