Advertisement
READ THIS OPERATION
MANUAL
AND SAFETY
RULES BEFORE
OPERATING
YOUR UNIT. Compare
the illustrations
with your unit to familiarize
yourself
with
the location
of various
controls
and adjustments.
Save this manual
for future
reference.
Spray
Gun
High
.Pressure
Engine
Dual Tank
Multi-
Cleaning
Adjustable
System
High
Pressure
Pump
BASIC ELEMENTS
OF A PRESSURE WASHER
High Pressure
Pump (located
inside the shroud):
Increases the pressure of the
water supply.
Engine:
Drives the high pressure pump.
High Pressure
Hose: Carries the pressurized
water from the pump to the gun
and wand.
Spray Gun: Connects
with wand to control water flow rate, direction, and
pressure.
Multi-Adjustable
Spray Wand:
Has a spray nozzle which adjusts
from a pencil
stream
(0 °) to a wide angle fan spray (40°). The spray can be adjusted
by twisting
the nozzle clockwise
and/or
counterclockwise.
Also, the high and low pressure
settings
can be controlled
by moving
the nozzle in and out. See Operation
section.
See How To Use Spray Wand paragraph
in this section.
Chemical
Injector
Rinsing
Hose (not shown):
Rinses the chemical
injector
after
use of cleaning
solution.
Dual Tank Cleaning
System:
Allows easily switching from one cleaning solution
to another depending
on the cleaning task by simply turning the control valve
knob.
11- ENG
D27918
Advertisement
