Table of Contents
Advertisement
READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING
YOUR UNIT. Compare the illustrations with your unit to familiarize yourself with the
location of various controls and adjustments. Save this manual for future reference.
Spray
Wand
with
Variable
Spray
Nozzle
Water
outlet
Water
inlet with
filter
BASIC ELEMENTS OF A PRESSURE WASHER
High Pressure Pump (located inside the shroud): Increases the pressure of the
water supply.
Motor (located inside the shroud): Drives the high pressure pump.
High Pressure Hose: Carries the pressurized water from the pump to the gun
and wand.
Spray Gun: Connects with wand to control water flow rate, direction, and
pressure.
Spray Wand With Variable Spray Nozzle: Spray nozzle adjusts from a narrow jet
stream to a fan jet spray. The spray can be adjusted by twisting the nozzle
clockwise and/or counterclockwise.
Rotary nozzle -increases cleaning efficiency by allowing you to cover more area
while using a concentrated spray pattern.
Cleaning Solution Application Unit - Used to apply cleaning solutions, see How
To Use Cleaning Solution Application Unit in this section.
PRESSURE WASHER TERMINOLOGY
Ground Fault Circuit Interrupter Protection (GFCI): This washer is provided
with a ground fault circuit interrupter (GFCI) built into the plug of the power
supply cord. This device provides additional protection from the risk of electric
shock. Should replacement of the plug or cord become necessary, use only
identical replacement parts that include GFCI protection.
D29382
OPERATING INSTRUCTIONS
Spray
Gun
High
Pressure
Hose
High Pressure Pump
Quick-connect
8- ENG
Electric
Cord
Motor
ON-OFF
switch
Motor
Cleaning Solution
application unit
Rotary Nozzle
Quick-connect adapter
Hide quick links:
Advertisement
Table of Contents
