Pcl Setup - Oki C9600hdn Network And Configuration Manual

Item
X dimension
Y dimension
PS Setup
Item
Network
protocol
Parallel
protocol
USB protocol

PCL Setup

Item
Font source
Font Number
Value
3.0 ~ 8.5 ~ 12.9 inch
(76 ~ 328 mm)
3.5 ~ 11 ~ 47.2 inch
(90 ~ 1200 mm)
Value
ASCII
RAW
ASCII
RAW
ASCII
RAW
Value
Resident
DIMMO
Downloaded
10
C1
S1
Description
Sets default Custom paper width,
perpendicular to the direction of
motion of paper.
Sets default Custom paper
length, in the same direction as
the direction of motion of paper.
Description
Specifies PS transmission protocol for
network data. It does not appear for Non-
PS type.
Specifies PS transmission protocol for
Centronics data. It does not appear for
Non-PS type.
Specifies PS transmission protocol for
USB data. It does not appear for Non-PS
type.
Description
Specifies the location of the PCL
default font.
DIMM0: displayed only when Font
DIMM ROM specially prepared fonts
are in the slot. DOWNLOADED:
displayed when software font is
downloaded to RAM as permanent
designation. Fonts downloaded to
Flash and HDD by PJL command
are not displayed in this menu.
Sets the PCL font number.
238