Oki C9600hdn Network And Configuration Manual page 200

There are two types of transfer mode:
– BINARY mode, in which the file contents are output as it is
and
– ASCII mode, which converts the LF code to the CR+LF
code.
If a binary file converted by the printer driver is transferred, the
transfer mode has to be BINARY mode.
Example
Changing transfer mode to binary mode and verifying the
current mode
ftp> type binary
200 Type set to I.
ftp> type
Using binary mode to transfer files.
ftp>
4. Transfer the print data to the network card using the put
command. Two methods of file transfer using the put command
are available, as shown in the examples below.
Example Method 1
Transferring print data test.prn
ftp> put test.prn
Example Method 2
Transferring print data specified by absolute path/users/test/
test.prn
ftp> put /users/test/test.prn /lp
5. Logout from the network card using the quit command:
ftp> quit
Printing from UNIX: LPD and FTP • 200