Oki C9600hdn Network And Configuration Manual page 187

3. Use the ping command to confirm connection with the network
card.
Example
For host name PRINTER:
# ping PRINTER
If there is no reply, then there is a problem with the
configuration of the IP address (the IP address has been
already set manually or by the DHCP/RARP server) or with the
network. Reset the network interface card settings to their
defaults and then try to set a temporary IP address. If you still
have the problem after resetting the network interface card,
consult the network manager.
4. Register the printer in the /etc/printcap file.
Example:
For host name PRINTER, to create a queue called
PRINTER_lp:
PRINTER_
:lp=:rm=C7400:rp=lp:\
:sd=/usr/spool/
:lf=/usr/spool/
PRINTER_lp
lp:
The name of the device used to connect to the
printer. Does not need to be specified for a remote
machine.
rm:
The name of the host of the remote printer.
This should be the same as the name added to the /
etc/hosts file.
rp:
The name of the printer on the remote printer.
It should be
sd:
The spool directory.
lf:
The error log file. Give the absolute path.
Printing from UNIX: Configuring the Operating System • 187
lp: \
PRINTER_
PRINTER_
The name of the printer queue
lp
.
lp:\
PRINTER_
lp/
Give the absolute path.
lp_errs: