Oki C9600hdn Network And Configuration Manual page 236

Item
Copies
Duplex
Binding
Job offset
Output bin
Finisher Setup
This appears only if the optional finisher is installed. See the documentation
supplied with the finisher for information on setting it up.
Media check
Transparency
detect
Resolution
Toner save
mode
Value
1 ~ 999
ON
OFF
LongEdge
ShortEdge
ON
OFF
Facedown
Faceup
Facedown
Finisher
Enable
Disable
Auto
Disable
600dpi
600x1200dpi
600dpi multi-level
ON
OFF
Description
Sets number of copies. Disabled
for local print, except for demo
data.
Specifies duplex printing.
Specifies how to bind duplex
printing.
Enables/Disables Job offset.
Specifies where to eject prints.
Specifies where to eject prints
when a Finisher is installed.
Enables/Disables whether the
printer checks that paper size
required by the print data
matches that of the tray. Only
standard sizes can be checked.
Enables/Disables the automatic
detection of transparencies. (Use
it while detecting sensor
mistakes).
Sets the resolution.
Sets toner saving mode.
236