Step 5: Check.bin File Settings and Save the Project
1. To check the settings for the bin files, double-click the file name.
The Edit Component Name and ID dialog box appears.
2. Here you can edit the
• file name
• ID number (the number you need to enter in the printer driver
when printing overlays)
• volume:
0: = printer's disk drive PCL partition
1: = printer's disk drive Common partition
%disk0%: = printer's disk drive PostScript partition
2: = Flash memory PCL
%Flash0% = Flash memory PostScript
• path.
3. Click OK.
4. When you're through reviewing the settings, click
Save
Project.
Step 6: Download the Project to the Printer
1. Click
Projects
Command Issued appears.
2. Click OK.
B: Test Printing PCL Macros
1. With Storage Device Manager open and the appropriate printer
icon highlighted, click
The Test Macro dialog box appears.
2. Enter the ID number for the macro file you wish to print (you can
get this from the File List printout: look under Volume 0; e.g., for
2:OKI.BIN, enter 2), then click OK.
Command Issued appears.
3. Click
OK
and wait for the macro to print.
®
Send Project Files to
Printers
C9300/C9500 Software Utilities • 444
Printer.
®
Test
Macro.
®
Projects