Oki C9300 User Manual page 399

4. Switch the printer on again (The printer has to be switched off
and back on again to initialize the hard disk before use).
• When initializing the hard disk, any fonts, overlays or
print jobs that have been acknowledged will be erased.
• The Storage Device Manager can also be used to
initialize the hard disk after installation. Please refer to
the User Guide for the Storage Device Manager.
5. In the printer driver(s), change the settings to include the new
hard disk drive:
– For Windows XP: see page 80
– For Windows 2000: see page 153
– For Windows Me/98/95 (PostScript driver only): see page 225
– For Windows NT 4.0: see page 286
NOTE
C9300/C9500 Accessories • 399