Oki C9300 User Manual page 440

Step 2:Create a New Project
1. Open Storage Device Manager.
2. Click Projects
The Project dialog box opens.
3. Click Projects
the project on your hard drive or your network, then click Save.
Step 3: Add Files to the Project
1. Click Projects
The Open dialog box appears.
2. Make sure
drop-down list.
3. Browse to the folder where the files are saved and select the files
you wish to add to the project, then click Open.
The Information dialog box appears.
4. Click OK.
The files are saved as HST.
5. Repeat steps 1 through 4 until you have added all the files you
wish to add to the Project.
To delete a file from the project, click the file name, then
click Projects
Step 4: Check the Location for Storing the Files in the Printer's
Memory
• If your printer is equipped with an internal hard disk drive, the
Storage Device Manager will automatically save the forms to the
PostScript partition on the hard drive.
• If your printer does not have an internal hard disk drive, the
Storage Device Manager will automatically store the forms in the
PostScript section of the Flash memory.
To store the forms in the Flash memory instead of on the hard disk
drive:
®
New Project.
®
Save Project, enter the path/name for storing
®
Add File to
PRN files (*.prn)
®
Remove File from Project.
C9300/C9500 Software Utilities • 440
Project.
is selected in the
NOTE
Files of type