Oki C9300 User Manual page 333

5. On the Job Options
Print.
a. Enter a job name of up to 16 characters under
Setting and, if required, select
print job.
b. Type in a four digit personal ID number from 0000 to 7777, then
click OK.
6. Enter the number of copies and, if required, select Collate.
PostScript Driver
7. Click OK and print the document. A print file of the document is
created and stored on the hard disk drive, and one copy is printed
for checking.
8. After checking the proof, print or delete (if incorrect) the
remaining copies of the document using the procedures given
below.
tab, under
C9300/C9500 Operation • 333
Job Type, select
Request Job Name for each
PCL Driver
Proof and
Job Name