Duplex Printing (Printing On Both Sides Of The Paper) - Oki C9300 User Manual

DUPLEX PRINTING
(PRINTING ON BOTH SIDES OF THE PAPER)
The optional duplex unit must be installed in the printer and
enabled before duplex printing can be carried out.
• Standard paper sizes only.
• Paper weight range 20 to 28 lb. US Bond (75 to 105 g/m
• Paper must be loaded print side up.
• Only Tray 1, optional Trays 2 and 3, and the High Capacity Feeder
trays can be used for duplex printing. The Multi-purpose tray
cannot be used for duplex printing.
These instructions explain how to change the settings as
you are printing a job. If you wish to change the settings to
apply to all jobs:
• Click Start
• Right click the appropriate printer name, then select
Properties.
• Follow steps 3, etc., below. Note that the Properties
screen for setting defaults will have more tabs.
Duplex printing using the PostScript driver
1. Open the file in your application and select
2. In the Print dialog box, click the OKI C9x00 PS driver on the
General
®
Settings
tab, then click the
C9300/C9500 Operation • 194
NOTE
NOTE
® Printers.
Layout tab.
²
).
® Print.
File