Errors In Xml Passed From Srm; Xp Raid Manager Command Errors In Rmsra.exe - HP StorageWorks XP10000 - Disk Array Administrator's Manual

Errors in XML passed from SRM

[XP Virtualization Adapter] [Time]: [command_main] : Parameter in XML was NOT enough.
Cause - A parameter in XML was entered from SRM to the XP Virtualization Adapter, but it could
not be found in any parameters.
Action to be taken - Confirm if SRM has passed appropriate parameters in XML from own SRM
log message.
[XP Virtualization Adapter] [Time]: [command_discoverLuns] : NO arrayId in XML.
Cause - A parameter in XML (discoverLuns) was entered from SRM to the XP Virtualization Adapter,
but it could not be found array ID.
Action to be taken - Confirm if SRM has passed Array ID parameter in XML (discoverLuns) from
own SRM log message.
[XP Virtualization Adapter] [Time]: [command_failover] : NO ReplicaLunKey in XML.
Cause - A parameter in XML (failover) was entered from SRM to the XP Virtualization Adapter, but
it could not be found ReplicaLunKey (LDEV number of XP Continuous Access_SVOL).
Action to be taken - Confirm if SRM has passed ReplicaLunKey parameter in XML (failover) from
own SRM log message.
[XP Virtualization Adapter] [Time]: [command_testFailover] : Action in XML was NOT start/stop.
Cause - A parameter in XML failover test was entered from SRM to the XP Virtualization Adapter,
but it could not be found start/stop as Action.
Action to be taken - Confirm if SRM has passed start/stop parameter in XML failover test from own
SRM log message.
[XP Virtualization Adapter][Time]: [command_testFailover] : NO ReplicaLunKey in XML.
Cause - A parameter in XML failover test was entered from SRM to the XP Virtualization Adapter,
but it could not be found ReplicaLunKey (LDEV number of XP Continuous Access_SVOL).
Action to be taken - Confirm if SRM has passed ReplicaLunKey parameter in XML failover test from
own SRM log message.
[XP Virtualization Adapter][Time]: [command_main] : Can't be connected to HORCMINST=X@
with error(0x000000fc).
Cause - A connection address in XML was entered from SRM to the XP Virtualization Adapter, but
it could not be found HORCM instance number X.
Action to be taken - Check if HORCM instance number is running, or a connection address (Alias)
specified in configuration of Array Manager is appropriate.

XP RAID Manager command errors in rmsra.exe

[XP Virtualization Adapter][Time]: [" XML OUTPUT file name"] : fopen : "system error message"
Cause - A parameter in XML was entered from SRM to the XP Virtualization Adapter, but it could
not be created XML OUTPUT file name.
Action to be taken - Confirm if SRM has passed appropriate output file in XML from own SRM log
message, or make action by referring to system error message.
[XP Virtualization Adapter][Time]: [system()] : "Command line" : "system error message"
Cause - An execution of Command line has failed via system() call.
Action to be taken - Confirm if XP RAID Manager is installed, or the path of Command line is
correct, or %HORCMROOT% ENV has being set, or make action by referring to system error
message.
40 Troubleshooting HP StorageWorks XP Virtualization Adapter