Testing The Snmp Trap Report; Delete Community Ip Address Menu - HP StorageWorks XP20000/XP24000 - Disk Array Reference Manual

1. Change to Modify mode.
2. Log on to Remote Web Console. Click Go
menu bar of Remote Web Console Main window. The SNMP Information window is displayed
(see Figure 4
3. Select SNMP Information.
4. In Community & Trap, select the unwanted community IP address. Right-click to display Delete IP
Address menu (see
5. Select Delete IP Address. A confirmation message displays.
6. Select OK or Cancel. The selected IP address is deleted from Community & Trap, but the change
is not yet implemented.
7. Select Apply or Cancel. Select OK on the confirmation message.
Figure 14 Delete Community IP Address Menu
.

Testing the SNMP Trap Report

To test the SNMP Trap report:
1. Log on to Remote Web Console. Click Go
menu bar of Remote Web Console Main window. The SNMP Information window appears.
2. Change to Modify mode.
3. Select Trap Test. A confirmation message displays.
4. Select OK or Cancel. Verify whether the SNMP trap report, which is reference code 7FFFFF, is
received by the SNMP manager registered in the community.
24 Performing SNMP Operations
on page 14).
Figure 14 on page 24).
Environmental Settings
Environmental Settings
SNMP Information in the
SNMP Information in the