Adding Community Ip Addresses; Change Community Menu; Change Community Dialog Box - HP StorageWorks XP20000/XP24000 - Disk Array Reference Manual

Figure 10 Change Community Menu
.
Figure 11 Change Community dialog box
.

Adding Community IP Addresses

To add a community IP address:
1. Log on to Remote Web Console. Click Go
menu bar of Remote Web Console Main window. The SNMP Information window is displayed
(see Figure 4
2. Select and right-click the desired community to display the Add Community menu (see
12 on page 23).
3. Select Add IP Address. The Add IP Address dialog box displays (see
22 Performing SNMP Operations
on page 14).
Environmental Settings SNMP Information in the
Figure
Figure 13 on page 23).