Mib Mounting Specifications; System Groups - HP StorageWorks XP20000/XP24000 - Disk Array Reference Manual

Specific Trap
Code
4

MIB Mounting Specifications

The supported MIB mounting specifications are as follows:
mgmt: OBJECT IDENTIFIER ::= {iso(1) org(3) dod(6) internet(1) 2 }
mib-2: OBJECT IDENTIFIER ::= {mgmt 1}
An SNMP agent mounts only system groups in mib-2, as shown in the following table.
Table 12 System Groups
Name
sysDescr
{system 1}
sysObjectID
{system 2}
sysUpTime
{system 3}
sysContact
{system 4}
sysName
{system 5}
sysLocation
{system 6}
sysService
{system 7}
NOTE:
The following symbols cannot be used: \ , / : ; * ? " < > | & % ^
Trap
RaidEventUserService
Description
Name of hardware or OS.
Object ID indicating the product
identification number.
An accumulated time from an
SNMP agent.
A manager who manages an
agent or a contact address.
A given name for managing an
agent.
An agent setup location.
Value indicating a service.
XP24000/XP20000 SNMP Agent Reference Guide
Description
Minor failure.
Mounted Value
Fixed value
RAID 600
Fixed value. See "Object Identifier
System" on page 27.
1.2.6.1.4.1.116.3.11.4.1.1
Unit: ms
Maximum 180 characters in an ASCII
characters string (see Note )
Input by a user from an SNMP setting window.
Maximum 180 characters in an ASCII
characters string (see Note )
Input by a user from an SNMP setting window.
Maximum 180 characters in an ASCII
characters string (see Note )
Input by a user from an SNMP setting window.
Fixed value
76 (decimal)
29