HP StorageWorks XP20000/XP24000 - Disk Array Reference Manual page 15

Item Description
Enter the IP address of the manager that the SNMP Agent receives the request from.
Ipv4 and Ipv6 addresses can be specified for IP Address. However, if the OS of SVP is
Windows XP and you enter Ipv6 address and select Apply, an error message is displayed
and the Ipv6 address is not set.
Any IP address having all values set to zero (0) cannot be specified for Ipv4 and Ipv6.
The Ipv4 address is specified by entering four (4) numbers that are separated by periods
IP Address
(.) using a maximum 3 digits from zero (0) to 255 inclusive. (For example:
text box
XXX.XXX.XXX.XXX where X is a number). Enter the numbers only and do not enter periods.
The Ipv6 address is specified by entering eight (8) hexadecimal numbers that are separated
colons (:) using a maximum 4 digits from zero (0) to FFFF inclusive. (For example:
YYYY:YYYY:YYYY:YYYY:YYYY:YYYY:YYYY:YYYY where Y is a hexadecimal number). Enter
the hexadecimal numbers only and do not enter the colons. The cursor can be moved
between the entry field using the Tab key.
Is selected when entering an Ipv4 address. The Ipv4 address can be entered to IP address
Ipv4 radio
text box when this radio box is selected.
box
Is selected when entering Ipv6 address. The Ipv6 address can be entered to IP address text
Ipv6 radio
box when this radio box is selected.
box
Adds new IP addresses to the IP Address list box.
Set
Allows you to add, delete, or change SNMP trap information. The registered IP address is
the trap destination for the specified community.
Each community can have more than one defined IP address (sees
Name" on page 19 and
Community &
You can register up to 32 community names and up to 32 IP addresses per community
Trap
name.
You can use up to 180 alphanumeric characters for a community name. You cannot use
the following: ", \, ;, :, ,, *, ?, <, >, |, /, ^, &, %, and a space before or after the com-
munity name.
"Adding Community IP Addresses" on page 22).
XP24000/XP20000 SNMP Agent Reference Guide
"Adding a Community
15