Site Preparation Time Allowances; Mechanical Vibration Specifications - HP StorageWorks XP12000 - Disk Array Site Preparation Manual

* Check items
Does the computer room support other
*
environmental considerations (such as
vibration and acoustics)?
Are two AC outlets, on different lines,
*
available for the equipment?
Does the input voltage correspond to
*
the DKC and DKU equipment
specifications?
Are the input circuit breakers adequate
*
for equipment loads?
Does the input frequency correspond to
*
equipment specifications?
Is an appropriate uninterruptible power
supply (UPS) strategy in place?
If lightning arresters are recommended,
are they installed?
Have all sources of electrical
*
interferences been corrected?
Does the customer site have access
control (for example, will HP
representatives need an escort)?
Does the computer room have access
control (for example, will HP
representatives need a security code)?
Are all floors, stairs, elevators,
stairwalkers, lifts, ramps, or ladders
*
needed to move the equipment
adequate to support its weight and size?
Will the equipment fit through all doors
*
and corridors and in lifts?
Does the building have a loading dock?
*
Maximum access height is _____m.
For any additional equipment required
(for example, connectors, receptacles,
cables, and any equipment not supplied
by HP), is the equipment on site and
ready for use?

Site preparation time allowances

The following site preparation tasks may require several weeks:
• Acquiring required power connectors
16 Site preparation team and tasks
Yes No Reference
Mechanical vibration
specifications, page 38
Acoustic specifications, page 39
Electrical requirements, page 42
Line voltage, page 43
AC line voltage
49
Branch circuit breakers, page 43
Frequency, page 43
Uninterruptible power supply
(UPS), page 46
Sources of electrical
interference, page 46
Sources of electrical
interference, page 46
NA
NA
Delivery space requirements, page 47
Delivery space requirements, page 47
NA
NA
requirements, page