Table of Contents
Advertisement
2 Prepare your site
Overview
Preparing your site means providing:
Physical rack space for the equipment
AC power for the EVA
Proper ventilation and temperature conditions
LAN or Fibre Channel cables to attach the EVA hardware to your network.
To ensure continuous, safe, and reliable operation of your equipment, place your system in an
approved environment.
Consider using the HP Enterprise Configurator (eCO) to help plan and configure racks and
rack-mountable devices. The eCO is available on the HP website:
http://h30099.www3.hp.com/configurator
Click Configure under Disk products.
Provide adequate structural support for the floor
Calculate the total weight of your equipment and verify that your site can support the weight.
Provide adequate clearance space and ventilation
Be sure to provide adequate clearance around the front and back of the racks. Provide at least
25 inches (63.5 cm) in the front of the rack to allow the doors to open fully and provide at least
30 inches (76.2 cm) in the rear of the rack to allow for servicing and airflow.
If there are unused spaces in your rack, attach blanking panels across those empty spaces to force
the airflow through the components instead of through the open spaces.
8
Prepare your site
Advertisement
Table of Contents
