Mechanical Vibration Specifications; Shock Specifications - HP StorageWorks XP12000 - Disk Array Site Preparation Manual

Disk array
Hide thumbs Also See for StorageWorks XP12000 - Disk Array:
Table of Contents

Advertisement

You should not see any condensation in or around the disk array under any conditions. There is no
procedure for recovery from moisture condensation.
Table 12 Humidity specifications
Humidity range type
Recommended operating humidity range at 22 degrees C (71
degrees F)
Operating humidity range at 22 degrees C (71 degrees F)
Nonoperating humidity range
Shipping and storage humidity range (product packed in factory
packing)
Operating maximum wet bulb temperature
Nonoperating maximum wet bulb temperature
Shipping and storage maximum wet bulb temperature

Mechanical vibration specifications

Continuous vibration can cause a slow degradation of mechanical parts and, when severe, can cause
data errors in disk drives. Mechanical connections such as printed circuit assembly (PCA) conductors,
cable connectors, and processor backplane wiring can also be affected by vibrations. Vibration
specifications apply to all three axes. For specification tests, see ASTM D999-91 Standard Methods
for Vibration Testing of Shipping Containers.
Table 13 Mechanical vibration specifications
Condition
Operating
Nonoperating
Shipping and storage (product packed in
the factory)

Shock specifications

Table 14
lists shock specifications. For horizontal shock testing methods, see ASTM D5277-92 Standard
Test Methods for Performing Programmed Horizontal Impacts Using an Inclined Impact Tester. For
vertical shock testing methods, see ASTM D6055-96 Standard Test Methods for Mechanical Handling
of Unitized Loads and Large Shipping Cases and Crates.
Table 14 Shock specifications
Condition
Operating
Nonoperating
38
Site requirements for the HP XP12000 Disk Array
Noncondensing relative humidity (RH)
50% to 55%
20% to 80%
8% to 90%
5% to 95%
26 degrees C79 degrees F
27 degrees C81 degrees F
29 degrees C84 degrees F
Specification
0.25 mm, 5–10 Hz 0.05 G, 10–300 Hz
2.5 mm, 5–10 Hz 0.5 G, 10–70 Hz 0.05 mm, 70–99 Hz 1.0
G, 99–300 Hz
0.5 G, 15 min. (at four most severe resonances between 5 and
200 Hz)
Specification
None
8 G, 15 ms

Advertisement

Table of Contents
loading

Table of Contents