Connecting To An Analog Component; Connecting To A Digital Component - JVC TH-A55AH Instructions Manual

Getting started

Connecting to an analog component

You can enjoy the sound of an analog component such as a VCR, TV, or Cassette recorder with this system. Use RCA pin plug cords (not
supplied) for connection.
Red White
RCA pin plug cord
(not supplied)
NOTE
• If you connect a sound-enhancing device such as a graphic equalizer between the source components and this system, the sound output through this
system may be distorted.
• When playing a video component such as a VCR;
To listen to the sound, select "AUX" as the source to play. (A pg. 20)
•
To see the picture, connect the video output jack of the component to the video input jack of the TV directly, and select the correct input mode on
•
the TV.

Connecting to a digital component

You can enjoy the sound of a digital component such as a DBS (Direct Broadcast Satellite) tuner or MD recorder with this system. Use digital
optical cord (not supplied) for connection.
Before connecting a digital optical cord,
unplug the protective plug.
NOTE
When playing a video component such as a DBS tuner;
• To listen to the sound, select "AUX DIGITAL" as the source to play. (A pg. 20)
• To see the picture, connect the video output jack of the component to the video input jack of the TV directly, and select the correct input mode on the
TV.
To audio
output
Digital optical cord
(not supplied)
Center unit
VCR
Center unit
To digital optical output
Cassette recorder
TV
MD recorder
DBS tuner
14