Usb Configuration - HP Photosmart R707 User Manual

In the Setup Menu (page 115), select Date & Time,
2 In the Da_e & Time sub-menu,
adjust the value of the highlighted
selection by using the A v
buttons.
3 Pressthe _ _ buttons to move to
the other selections.
4 Repeat steps 2 and 3 until the
correct date/time format, date, and time are set.
5 PressMenu/OK to save the setting and return to the Setup
Thenewsettingremainsin effectuntil it ischangedagain, even
whenyou turn thecamera off.
USB Configuration
This setting determines how the camera is recognized when
connected to a computer.
] In the Setup Menu (page 115),
select USB.
2 In the USB Configuration
sub-menu, highlight one of these
two choices:
Digital Camera--Causes the
computer to recognize the camera
as a digital camera using the Picture Transfer Protocol (PTP)
standard. This is the default setting on the camera.
Disk Drive--Causes the computer to recognize the camera as a
disk drive using the Mass Storage Device Class (MSDC)
standard. Use this setting to transfer images to a computer that
does not have the HP Image Zone software installed on it (see
Transferrin 9 Images to a Computer without HP Image Zone
So'ware on page ] 26). This setting may not work with a
Chapter 6: Using the Setup Menu 119