HP Photosmart R707 User Manual page 110

3 Your camera came with a
special USB cable for
connecting the camera to a
computer. Connect the larger
end of that USBcable to the
computer.
4 Open the rubber door on the
side of the camera and
connect the small end of the
USB cable to the USB
connector on the camera.
NOTE If your computer is running Windows XP, when you
turn on the camera in the next step, a dialog box will
display that requests you to Seled the program to launch
for this action. Simply click Cancel to close this dialog
box.
S Turn on the camera. The HP Image Transfer software wi]]
launch on your computer. If you have set the software to
automatically transfer the images in the camera, the images
will automatically transfer to the computer. Otherwise, in the
Welcome screen, click Start Transfer. The images are
transferred to the computer, and then if there are any still
images that were previously selected for printing (page 83)
or selected for HP instant Share destinations (page 97),
those actions are started.
NOTE If the images being transferred to your computer
include a panoramic sequence of images (see Using
Panorama Mode on page 49), the ArcSofl Panorama
Maker software starts automatically. Follow the
instructions on the screen to stitch the images in the
panoramic sequence together as a single panoramic
image on your computer.
110 HP Photosmart R707 User's Manual