HP Photosmart R707 User Manual page 50

Your camera came with the ArcSoft_ Panorama Maker
TM
software that automatically stitches the images in the
panoramic sequence together on your computer during image
transfer. The Panorama Maker software was automatically
installed on your computer during the HP Image Zone software
instaJJationprocess (see In_lling the $o_ware on page 19).
To transfer the panoramic sequence of images from your
camera to your computer so that the ArcSoft Panorama Maker
software can stitch the images together, see T_nsbrring
Irnoges foo Computer on page 109.
Toklng o Pono_omlc Sequence of P_¢_ures
Pressthe Mode button on top of
the camera until the Panorama
[_i2Z_] mode appears in the Image
Display. The camera switches to
LiveView with ::_ displayed in
the Image Display. You are now
ready to take the first picture in
your panoramic sequence.
NOTE Panorama images are stitched together from left to
right, so your first image must be at the left-most end of
the panorama view.
2 Pressthe Shutter button to take the
first picture in the panoramic
sequence. After In_anf Review,the
camera switches to Live View with
displayed in the Image
Display.
50 HP Photosmart R707 User's Manual