Nikon COOLPIX S8200 Reference Manual page 53

I_I ( Auto) Mode
Options Available in the Auto Shooting Menu
When using I_1 (auto) mode, the following settings can be changed.
Select I_1 (auto) mode -)' MENU button -)' I_1 tab (_ 11
)
• The same items can be set when using continuous
shooting mode (_ 50). Other than the continuous
shooting type, items share the same settings with
continuous shooting mode, and the settings are
saved in the camera's memory even if the camera is
turned off.
....... O°pti_on _'' Description
Allows you to select the combination of image size and
Image mode image quality used when saving images (_ 71). 71
This setting is also applied to other shooting modes.
Allows you to adjust the color tones of the image to match
what you see with your eye. Although Auto (default setting)
can be used in most shooting conditions, if the desired color
White balance tones are not achieved, adjust white balance to suit the sky _30
conditions or light source.
• When white balance is set to settings other than Auto or
Flash, set the flash mode ([_ 56) to off ((_)).
Allows you to select the method that the camera uses to
measure the brightness of the subject. The camera adjusts
Metering the exposure, which is a combination of shutter speed and _'_33
aperture value, based on the brightness measurement.
Filer ISO sensitivity allows darker subjects to be captured.
By increasing the shutter speed, this feature can also reduce
blurring caused by camera shake and subject movement
ISO sensitivity even when shooting in adequately lit conditions. When ISO _'_34
sensitivity is set to Auto (default setting), the camera sets the
ISO sensitivity automatically, and _ is displayed while
Allows you to determine how the camera selects the focus
area that is used for autofocus; the available settings are
AF area mode Face priority, Auto, Manual, Center, and Target finding _37
AF (default setting). When using Target finding AF, if the
5"
e_
37