Page 1 DIGITAL CAMERA Reference Manual...
Page 2 High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. • All other trade names mentioned in this manual or the other documentation provided with your Nikon product are trademarks or registered trademarks of their respective holders. AVC Patent Portfolio License...
Page 3 Introduction Parts of the Camera and Basic Operations The Basics of Shooting and Playback Shooting Features Playback Features Recording and Playing Back Movies General Camera Setup Reference Section Technical Notes and Index...
Page 4: Read This First
Introduction Read This First Thank you for purchasing the Nikon COOLPIX S8200 digital camera. Before using the camera, please read the information in “For Your Safety” (A vi) and familiarize yourself with the information provided in this manual. After reading, please keep this manual handy and refer to it to enhance your enjoyment of your new camera.
Page 5: About This Manual
Read This First About This Manual If you want to start using the camera right away, see “The Basics of Shooting and Playback” (A 13). To learn about the parts of the camera and basic operations, see “Parts of the Camera and Basic Operations”...
Page 6: Information And Precautions
Before taking pictures on important occasions (such as at weddings or before taking the camera on a trip), take a test shot to ensure that the camera is functioning normally. Nikon will not be held liable for damages or lost profits that may result from product malfunction.
Page 7 Read This First Notice Concerning Prohibition of Copying or Reproduction Note that simply being in possession of material that was digitally copied or reproduced by means of a scanner, digital camera or other device may be punishable by law. • Items prohibited by law from being copied or reproduced Do not copy or reproduce paper money, coins, securities, government bonds or local government bonds, even if such copies or reproductions are stamped “Sample.”...
Page 8: For Your Safety
For Your Safety To prevent damage to your Nikon product or injury to yourself or to others, read the following safety precautions in their entirety before using this equipment. Keep these safety instructions where all those who use the product will read them.
Page 9 Should the insulation backwards. be damaged and the wires become • Do not short or disassemble the exposed, take it to a Nikon- battery or attempt to remove or authorized service representative for break the battery insulation or casing.
Page 10 When connecting cables to the input person or object and output jacks, use only the cables Failure to observe this precaution provided or sold by Nikon for the could result in burns or fire. purpose, to maintain compliance with product regulations.
Page 11: Notices
Nikon interference in a residential installation. Corporation may void the user’s This equipment generates, uses, and authority to operate the equipment.
Page 12 State of California to cause birth defects or other reproductive harm. DISPOSE OF USED BATTERIES ACCORDING TO THE Wash hands after handling. INSTRUCTIONS. Nikon Inc., 1300 Walt Whitman Road This symbol indicates that Melville, New York 11747-3064 this product is to be collected separately.
Page 13: Table Of Contents
Table of Contents Introduction ............................ii Read This First ............................ii Confirming the Package Contents ......................ii About This Manual............................... iii Information and Precautions........................iv For Your Safety............................vi WARNINGS................................vi Notices ..............................ix Parts of the Camera and Basic Operations ................. 1 Parts of the Camera..........................
Page 14 Table of Contents Shooting Features..........................35 A (Auto) Mode ........................... 36 Changing A (Auto) Mode Settings ....................... 36 Options Available in the Auto Shooting Menu................37 Scene Mode (Shooting Suited to Scenes) .................. 39 Changing Scene Mode Settings........................ 40 Characteristics of Each Scene........................40 Continuous Shooting Mode (Burst Shooting) ................
Page 15 Table of Contents General Camera Setup........................93 The Setup Menu ..........................94 Reference Section ........................E1 Using Easy Panorama (Shooting and Playback) ..............E2 Shooting With Easy Panorama......................E2 Playing Back Images With Easy Panorama (Scroll Playback)..........E4 Using Panorama Assist......................... E5 Playing Back and Deleting Images Captured Continuously (Sequence)....
Page 16 Table of Contents The Movie Menu.......................... E55 Movie Options ............................. E55 Autofocus Mode............................E59 The Setup Menu .......................... E60 Welcome Screen ............................E60 Time Zone and Date..........................E61 Monitor Settings............................E64 Print Date (Imprinting Date and Time)..................E66 Vibration Reduction ..........................E67 Motion Detection ............................
Page 17: Parts Of The Camera And Basic Operations
Parts of the Camera and Basic Operations This chapter describes the parts of the camera and also explains how to use basic camera features. Parts of the Camera ..........2 The Camera Body ..................2 Controls Used in Shooting Mode ............4 Controls Used in Playback Mode .............5 The Monitor.....................6 Basic Operations.............9 Switching Between Shooting Mode and Playback Mode ....9...
Page 18: Parts Of The Camera
Parts of the Camera and Basic Operations Parts of the Camera The Camera Body Flash raised Lens cover closed Zoom control ........4, 5, 27 Self-timer lamp..........59 f : wide..........4, 27 AF-assist illuminator ........95 g : tele...........4, 27 Mode dial ........... 4, 5, 9, 24 h : thumbnail playback....5, 31 Microphone (stereo) ......80, 88 i : playback zoom......5, 31...
Page 19 Parts of the Camera Monitor ............6, 24 Battery-chamber/ memory card slot cover....14, 15 Rotary multi selector (multi selector)...10 Eyelet for camera strap......12 k (apply selection) button....5, 10 HDMI mini connector (Type C).... 81 c (playback) button..4, 5, 9, 30, 80 Connector cover........16, 81 Charge lamp ........
Page 20: Controls Used In Shooting Mode
Parts of the Camera Controls Used in Shooting Mode Control Name Main Function Mode dial Switches to another shooting mode. Zooms in and out; rotate to g (i) to zoom in and make the subject larger, and rotate Zoom control to f (h) to zoom out and view a wider area.
Page 21: Controls Used In Playback Mode
Parts of the Camera Controls Used in Playback Mode Control Name Main Function • When the camera is off, press and hold Playback this button to turn the camera on and to button change to playback mode. • Returns to shooting. •...
Page 22: The Monitor
Parts of the Camera The Monitor • The information that is displayed in the monitor during shooting and playback changes depending on the camera’s settings and state of use. By default, information is displayed when the camera is turned on and when you operate the camera, and turns off after a few seconds (when Monitor settings (A 94) ➝...
Page 23 Parts of the Camera Shooting mode........24, 25 Aperture value ..........28 Macro mode ............64 Shutter speed..........28 Zoom indicator ........27, 64 Focus area (auto, target finding AF) ................28, 37 Focus indicator..........28 Focus area (manual or center)..... 37 AE/AF-L indicator........E5 Focus area (face detection, Flash mode ............56 pet detection) .........37, 43, 61 Battery level indicator ........20...
Page 24 Parts of the Camera Playback Mode Full-frame display (A 30) Shooting information (A 30) 1 5 / 1 1 / 2 0 1 1 1 2 : 0 0 1 5 / 1 1 / 2 0 1 1 1 2 : 0 0 1 0 0 N I KO N 9 9 9 9 .
Page 25: Basic Operations
Basic Operations Switching Between Shooting Mode and Playback Mode The camera has two modes of operation: Shooting mode, which is used for taking pictures, and playback mode, which is used for viewing pictures. To switch between playback mode and shooting mode, press the c (playback) button.
Page 26: Using The Rotary Multi Selector
Basic Operations Using the Rotary Multi Selector Rotate the rotary multi selector, press the top (H), bottom (I), left (J), or right (K) edges of its surface, and the k button. • The rotary multi selector is sometimes referred to as “the multi selector” in this manual. In Shooting Mode Displays m (flash mode) Rotates to select an item*.
Page 27: Using Menus (The D Button)
Basic Operations Using Menus (the d Button) If you press the d button while the shooting screen or playback screen is displayed, the menu for the current mode is displayed. Once the menu is displayed, you can change various settings. Shooting mode Playback mode 1 5 / 1 1 / 2 0 1 1 1 5 : 3 0...
Page 28: Attaching The Camera Strap
Basic Operations Switching Between Tabs Shooting menu Shooting menu Set up Image mode Welcome screen Image mode White balance Time zone and date White balance Metering Monitor settings Metering Print date ISO sensitivity ISO sensitivity AF area mode Vibration reduc tion AF area mode Autofocus mode Motion detec tion...
Page 29: The Basics Of Shooting And Playback
The Basics of Shooting and Playback Preparation Preparation 1 Insert the Battery ..................14 Preparation 2 Charge the Battery ..................16 Preparation 3 Insert a Memory Card................18 Shooting Step 1 Turn the Camera On....................20 Setting the Display Language, Date, and Time (First Use After Purchase) ..22 Step 2 Select a Shooting Mode..................24 Step 3 Frame a Picture .......................26 Step 4 Focus and Shoot.....................28...
Page 30: Battery Chamber
The Basics of Shooting and Playback Preparation 1 Insert the Battery Open the battery-chamber/memory card slot cover. Insert the included EN-EL12 Battery latch battery (rechargeable Li-ion battery). • Use the battery to push the orange battery latch up in the direction indicated by the arrow (1), and fully insert the battery (2).
Page 31: Removing The Battery
Preparation 1 Insert the Battery Removing the Battery Turn the camera off and be sure that the power-on lamp and the monitor have turned off before opening the battery-chamber/memory card slot cover. To eject the battery, open the battery-chamber/ memory card slot cover and slide the orange battery latch up in the direction indicated by the arrow (1).
Page 32: Preparation 2 Charge The Battery
Preparation 2 Charge the Battery Prepare the included Charging AC Adapter EH-69P. If a plug adapter* is included with your camera, attach the plug adapter to the plug on the Charging AC Adapter. Push the plug adapter firmly until it is securely held in place. Once the two are connected, attempting to forcibly remove the plug adapter could damage the product.
Page 33 Preparation 2 Charge the Battery The Charge Lamp Status Description Blinks slowly (green) The battery is charging. The battery is not charging. When charging is complete, the charge lamp stops blinking green and turns off. • The ambient temperature is not suited to charging. Charge the battery indoors with an ambient temperature of 5 °C to 35 °C (41 °F to 95 °F).
Page 34: Preparation 3 Insert A Memory Card
Preparation 3 Insert a Memory Card Be sure that the power-on lamp and the monitor are off and open the battery- chamber/memory card slot cover. • Be sure to turn off the camera before opening the cover. Insert the memory card. Memory card slot •...
Page 35: Internal Memory And Memory Cards
Preparation 3 Insert a Memory Card Removing the Memory Card Turn the camera off and be sure that the power-on lamp and the monitor have turned off before opening the battery-chamber/memory card slot cover. Gently push the memory card into the camera (1) to partially eject the card, and then remove the card (2).
Page 36: Battery Level Indicator
Step 1 Turn the Camera On Press the power switch to turn on the camera. • If you are turning the camera on for the first time, see “Setting the Display Language, Date, and Time” (A 22). • The lens extends and the monitor turns on. Check the battery level indicator and the number of exposures remaining.
Page 37: Turning The Camera On And Off
Step 1 Turn the Camera On Turning the Camera On and Off • The power-on lamp will light in green briefly then turn off, and then the monitor will turn on. • To turn off the camera, press the power switch. When the camera turns off, the power-on lamp and the display turn off.
Page 38: Setting The Display Language, Date, And Time
Step 1 Turn the Camera On Setting the Display Language, Date, and Time When the camera is turned on for the first time after purchase, the language-selection screen and the date and time setting screen for the camera clock are displayed. Press the multi selector H or I Language to select the desired language...
Page 39 Step 1 Turn the Camera On Daylight Saving Time If daylight saving time is in effect, press the multi selector H to enable the daylight saving time function L o n d o n C a s a b l a n c a while setting the region in step 3.
Page 40: Step 2 Select A Shooting Mode
Step 2 Select a Shooting Mode Rotate the mode dial to select a shooting mode. • A (auto) mode is used in this example. Rotate the mode dial to A. Auto mode • The camera switches to A (auto) mode and the A icon is displayed. 2 9 m 0 s 2 9 m 0 s 8 4 0...
Page 41: Available Shooting Modes
Step 2 Select a Shooting Mode Available Shooting Modes u Special effects mode (A 53) Effects can be applied to images during shooting. Six different effects are available. A (Auto) mode (A 36) C Continuous shooting Used for general shooting. Settings can be mode (A 50) adjusted in the shooting Change settings to...
Page 42: Step 3 Frame A Picture
Step 3 Frame a Picture Hold the camera steady. Flash • Keep fingers, hair, the camera strap, and other objects away from the lens, flash, AF assist-illuminator, microphone, and speaker. • When taking pictures in portrait (tall) orientation, turn the camera so that the flash is above the lens. Frame the picture.
Page 43: Using The Zoom
Step 3 Frame a Picture Using the Zoom Use the zoom control to activate optical zoom. Zoom out Zoom in • To zoom in on the subject, rotate the zoom control to g (telephoto). • To zoom out for a wider shot, rotate the zoom control to f (wide-angle).
Page 44: Step 4 Focus And Shoot
Step 4 Focus and Shoot Press the shutter-release button halfway, i.e., press the button slightly until you feel resistance. • When you press the shutter-release button halfway, the camera sets the focus and exposure (shutter speed and aperture value). Focus and exposure remain locked while the shutter-release button is pressed halfway.
Page 45 Step 4 Focus and Shoot Notes About Saving Images • While images are being saved, the number of exposures remaining (A 20) will blink. Do not open the battery-chamber/memory card slot cover while images are being saved. Removing the battery or memory card in these circumstances could result in loss of data or in damage to the camera or card.
Page 46: Step 5 Play Back Images
Step 5 Play Back Images Press the c (playback) button. • When you switch from shooting mode to playback mode, the last image saved will c (playback) be displayed full-frame. button Use the multi selector to select an image to Display the previous image display.
Page 47: Changing How Images Are Displayed
Step 5 Play Back Images Changing How Images Are Displayed When using playback mode, you can change how images are displayed by rotating the zoom control to f (h) and g (i). Playback Zoom 1 5 / 1 1 / 2 0 1 1 1 5 : 3 0 1 5 / 1 1 / 2 0 1 1 1 5 : 3 0 g (i) 0 0 0 1 .
Page 48: Step 6 Delete Unwanted Images
Step 6 Delete Unwanted Images Press the l button to delete the image currently displayed in the monitor. Press the multi selector H or I to select the desired deletion method and press the k Delete button. • Current image: The image currently displayed is Current image deleted.
Page 49 Step 6 Delete Unwanted Images Operating the Erase Selected Images Screen Press the multi selector J or K to select an Erase selec ted images image to be deleted, and then press H to display y. • To undo the selection, press I to remove y. •...
Page 51: Shooting Features
Shooting Features This chapter describes the camera’s shooting modes and the features that are available when using each shooting mode. You can select shooting modes and adjust settings according to the shooting conditions and the kind of images you want capture. 2 9 m 0 s 2 9 m 0 s 2 9 m 0 s...
Page 52: A (Auto) Mode
Shooting Features A (Auto) Mode Used for general shooting. Settings can be adjusted in the shooting menu (A 37) to suit the shooting conditions and the type of shot you want to capture. 2 9 m 0 s 2 9 m 0 s 8 4 0 8 4 0 •...
Page 53: Options Available In The Auto Shooting Menu
A (Auto) Mode Options Available in the Auto Shooting Menu When using A (auto) mode, the following settings can be changed. Select A (auto) mode M d button M A tab (A 11) • The same items can be set when using continuous Shooting menu shooting mode (A 50).
Page 54 A (Auto) Mode Option Description When Single AF (default setting) is selected, the camera focuses only while the shutter-release button is pressed Autofocus mode halfway. When Full-time AF is selected, the camera focuses even when the shutter-release button is not pressed halfway. You may hear the sound of the camera focusing.
Page 55: Scene Mode (Shooting Suited To Scenes)
Scene Mode (Shooting Suited to Scenes) When one of the following scenes is selected in the scene menu or by rotating the mode dial, camera settings are automatically optimized for the selected scene. x (Scene auto selector) j Night landscape (A 41) W Backlighting (A 42) (A 40) O Pet portrait (A 43)
Page 56: Changing Scene Mode Settings
Scene Mode (Shooting Suited to Scenes) Changing Scene Mode Settings • Depending on the scene, the multi selector H (X), I (p), J (n), and K (o) can be used to set the corresponding features. See “Features That Can Be Set Using the Multi Selector”...
Page 57 Scene Mode (Shooting Suited to Scenes) j Night landscape Captures the atmosphere of night landscapes. Press the d button to set Night landscape to Hand-held or Tripod. • Hand-held (default setting): Select this option to produce shots with reduced blurring and noise even when the camera is hand-held.
Page 58 Scene Mode (Shooting Suited to Scenes) W Backlighting Use when light is coming from behind the subject, throwing features or details into shadow. Press the d button to set HDR (high dynamic range) compositing using the HDR setting according to the shooting conditions and subject. •...
Page 59: Pet Portrait Auto Release
Scene Mode (Shooting Suited to Scenes) O Pet portrait Use this mode when taking pictures of dogs or cats. When the camera detects the face of a dog or cat, the camera focuses on that face. Once the camera has focused, by default it automatically releases the shutter (pet portrait auto release).
Page 60: Noise Reduction Burst
Scene Mode (Shooting Suited to Scenes) y M b Portrait Use this mode for portraits. • When the camera detects a human face, it focuses on that face (A 76). • The camera softens skin tones by applying the skin softening function before saving images (A 77).
Page 61 Scene Mode (Shooting Suited to Scenes) y M d Sports Use this mode when shooting sporting events. The camera captures a series of still images that allow you to clearly see detailed movements in a moving subject. • The camera focuses on the area in the center of the frame. •...
Page 62 Scene Mode (Shooting Suited to Scenes) y M f Party/indoor Suitable for taking pictures at parties. Captures the effects of candlelight and other indoor background lighting. • The camera focuses on the area in the center of the frame. • To avoid the effects of camera shake, hold the camera steady when shooting in dark surroundings.
Page 63 Scene Mode (Shooting Suited to Scenes) y M k Close-up Use this mode to photograph flowers, insects, and other small objects at close range. • Macro mode (A 64) is enabled and the camera automatically zooms to the closest position at which it can focus.
Page 64 Scene Mode (Shooting Suited to Scenes) y M l Museum Use indoors where flash photography is prohibited (for example, in museums and art galleries) or in other settings in which you do not want to use the flash. • The camera focuses on the area in the center of the frame. •...
Page 65: Easy Panorama
Scene Mode (Shooting Suited to Scenes) y M p Panorama Use this mode to take panorama pictures. From the screen displayed after the p Panorama scene mode is selected, select Easy panorama or Panorama assist. • Easy panorama (default setting): By simply moving the camera in the desired direction, panoramas that can be played back using the camera can be taken.
Page 66: Continuous Shooting Mode (Burst Shooting)
Continuous Shooting Mode (Burst Shooting) Use this mode to capture the details of a moving subject by shooting a continuous series of images. 2 9 m 0 s 2 9 m 0 s 8 4 0 8 4 0 Press the d button and confirm or change Continuous the settings in the continuous menu.
Page 67: Changing Continuous Shooting Mode Settings
Continuous Shooting Mode (Burst Shooting) Notes About Continuous Shooting Mode • It may take some time to save the images after shooting. The amount of time it takes to finish saving the captured images depends on the number of images, image mode, the write speed of the memory card, etc.
Page 68: Options Available In The Continuous Shooting Menu
Continuous Shooting Mode (Burst Shooting) Options Available in the Continuous Shooting Menu You can select the type of continuous shooting in the continuous shooting menu, in addition to the options (A 37) that are available when using A (auto) mode, such as image mode and white balance.
Page 69: Special Effects Mode (Applying Effects When Shooting)
Special Effects Mode (Applying Effects When Shooting) Effects can be applied to images during shooting. 2 9 m 0 s 2 9 m 0 s 8 4 0 8 4 0 The following six effects are available. Option Description Softens the image by adding a slight blur to the entire O Soft (default setting) image.
Page 70: Changing Special Effects Mode Settings
Special Effects Mode (Applying Effects When Shooting) Frame the subject and shoot. • The camera focuses on the area in the center of the frame. • When Selective color is selected in step 2, rotate the multi selector or press H or I to select the desired color from the slider.
Page 71: Features That Can Be Set Using The Multi Selector
Features That Can Be Set Using the Multi Selector When shooting, the multi selector H (X), I (p), J (n), and K (o) can be used to set the following features. X (flash mode) n (self-timer), smile timer, o creative slider, pet portrait auto release, exposure compensation smile timer continuous...
Page 72: Using The Flash (Flash Mode)
Features That Can Be Set Using the Multi Selector Using the Flash (Flash Mode) You can set the flash mode to match the shooting conditions. Press the multi selector H (m flash mode). Use the multi selector to select the desired mode and press the k button.
Page 73: Available Flash Modes
Features That Can Be Set Using the Multi Selector Available Flash Modes Auto Flash fires automatically when lighting is dim. Auto with red-eye reduction Reduce “red-eye” in portraits caused by the flash. Flash will not fire even when lighting is dim. •...
Page 74 Features That Can Be Set Using the Multi Selector Raising and Lowering the Flash The camera automatically raises and lowers the flash. • Do not pull the flash up or push down on it. Raising the Flash When you press the shutter-release button halfway, the flash will pop up if the conditions required for flash shooting are met.
Page 75: Using The Self-Timer
Features That Can Be Set Using the Multi Selector Using the Self-timer The camera is equipped with a self-timer that releases the shutter ten or two seconds after you press the shutter-release button. The self-timer is useful when you want to be in the picture you are taking, and when you want to avoid the effects of camera shake that occur when you press the shutter-release button.
Page 76 Features That Can Be Set Using the Multi Selector Press the shutter-release button the rest of the way down. • The self-timer starts, and the number of seconds remaining before the shutter is released is displayed in the monitor. The self- timer lamp blinks while the timer is counting 1 / 2 5 0 1 / 2 5 0...
Page 77: Using The Smile Timer, Smile Timer Continuous
Features That Can Be Set Using the Multi Selector Using the Smile Timer, Smile Timer Continuous When the camera detects a person’s smile, it automatically releases the shutter; you do not need to press the shutter-release button. • Smile timer: Images are captured one at a time. This feature can be used when shooting mode (A 24) is set to A (auto) mode or the Portrait or Night portrait scene mode (A 39).
Page 78 Features That Can Be Set Using the Multi Selector Frame the picture and wait for the subject to smile. • When the camera detects a human face, a double border (focus area) is displayed around that face. When the camera has focused on that face, the double 2 9 m 0 s 2 9 m 0 s border will turn green for a moment and focus is...
Page 79: More Information
Features That Can Be Set Using the Multi Selector Notes About the Smile Timer, Smile Timer Continuous • Digital zoom cannot be used. • Under some shooting conditions, the camera may be unable to detect faces or detect smiles. • See “Notes About Face Detection” (A 76) for more information. •...
Page 80: Using Macro Mode
Features That Can Be Set Using the Multi Selector Using Macro Mode When using macro mode, the camera can focus on objects as close as 1 cm (0.4 in.) from the front of the lens. This feature is useful when taking close-up pictures of flowers and other small subjects. Press the multi selector I (p macro mode).
Page 81: Adjusting Brightness (Exposure Compensation), Vividness, And Hue
Features That Can Be Set Using the Multi Selector Adjusting Brightness (Exposure Compensation), Vividness, and Hue (Creative Slider) When the shooting mode (A 24) is set to A (auto) mode (A 36) or continuous shooting mode (A 50), use the creative slider to adjust brightness (exposure compensation), vividness, and hue for taking pictures.
Page 82 Features That Can Be Set Using the Multi Selector When adjustment is complete, press J or K to select y and press the k button. • If the k button (except when P is selected) or the shutter-release button is pressed in step 3, the selected amount of effect is applied.
Page 83: Adjusting Hue (White Balance Adjustment)
Features That Can Be Set Using the Multi Selector Adjusting Brightness (Exposure Compensation) Adjust the overall brightness of the image. Slider • To make the subject brighter, move the slider toward “+.” • To make the subject darker, move the slider toward “–.”...
Page 84: Adjusting Brightness (Exposure Compensation)
Features That Can Be Set Using the Multi Selector Adjusting Brightness (Exposure Compensation) When the shooting mode (A 24) is set to scene mode (A 39) or special effects mode (A 53), you can adjust the brightness (exposure compensation). Press the multi selector K (o exposure compensation).
Page 85: Default Settings
Features That Can Be Set Using the Multi Selector Default Settings Default settings for each shooting mode are described below. • Information about scene mode can be found on the next page. Creative Exposure Flash Self-timer Macro slider compensation (A 56) (A 59) (A 64) (A 65)
Page 86 Features That Can Be Set Using the Multi Selector Default settings for scene mode are described below. Exposure Flash Self-timer Macro compensation (A 56) (A 59) (A 64) (A 65) x (A 40) U j (A 41) W W (A 42) X O (A 43) W b (A 44) V c (A 44) W...
Page 87: Changing The Image Size (Image Mode)
Changing the Image Size (Image Mode) Enter shooting mode M d button M Shooting menu M Image mode You can use the Image mode setting in the shooting menu to select the combination of image size and compression ratio that is used when saving images. Select the image mode best suited to the manner in which images will be used and the capacity of the internal memory or memory card.
Page 88 Changing the Image Size (Image Mode) Number of Exposures Remaining The following table lists the approximate number of images that can be saved in the internal memory and on a 4 GB memory card. Note that due to JPEG compression, the number of images that can be saved varies greatly depending on the composition of the image.
Page 89: Features That Cannot Be Used Simultaneously
Features That Cannot Be Used Simultaneously Some shooting settings cannot be used with other functions. Restricted Setting Description function When AF area mode is set to Subject Self-timer AF area mode (A 37) tracking, self-timer cannot be used. Smile timer continuous Smile timer continuous is used for shooting Continuous (A 61)
Page 90 Features That Cannot Be Used Simultaneously Restricted Setting Description function When using Target finding AF, if you use Self-timer (A 59) the self-timer, the camera functions as when AF area mode is set to Auto. Smile timer, smile timer Face detection is used regardless of the AF continuous (A 61) area mode setting.
Page 91 Features That Cannot Be Used Simultaneously Restricted Setting Description function Smile timer, smile timer Blink warning does not function. continuous (A 61) Blink warning When Hand-held is selected, blink warning Night portrait (A 45) is disabled. Notes About Digital Zoom •...
Page 92: Using Face Detection
Using Face Detection When the following shooting modes or settings are selected, the camera uses face detection to automatically focus on human faces. If the camera detects more than one face, a double border is 2 9 m 0 s 2 9 m 0 s displayed around the face that the camera will focus on, and single borders are displayed around the other faces.
Page 93: Using Skin Softening
Using Skin Softening When the shutter is released when using one of the following shooting modes, the camera detects one or more human faces (up to three), and processes the image to soften facial skin tones before saving the image. •...
Page 94: Focus Lock
Focus Lock You can use focus lock to focus on off-center subjects when center is selected for AF area mode. The following procedure describes how to use focus lock when using A (auto) mode with AF area mode (A 37) set to Center. Position the subject in the center of the frame.
Page 95: Playback Features
Playback Features This chapter describes the features that are available when playing back images. Playback menu Quick retouch 1 5 / 1 1 / 2 0 1 1 1 5 : 3 0 1 5 / 1 1 / 2 0 1 1 1 5 : 3 0 D-Lighting 0 0 0 4 .
Page 96: Features Available In Playback Mode (Playback Menu)
Playback Features Features Available in Playback Mode (Playback Menu) When viewing images in full-frame playback mode or thumbnail playback mode, you can select one of the following functions by pressing the d button (A 11) to display the menu and then selecting the c tab. Option Description Allows you to create retouched copies in which...
Page 97: Connecting The Camera To A Tv, Computer, Or Printer
Connecting the Camera to a TV, Computer, or Printer You can enhance your enjoyment of images and movies by connecting the camera to a TV, computer, or printer. • Before connecting the camera to an external device, make sure the remaining battery level is sufficient and turn the camera off.
Page 98: Using Viewnx 2
• Windows XP Home Edition/Professional (Service Pack 3) Mac OS • Mac OS X (version 10.5.8, 10.6.7) Refer to the Nikon website for the latest information on operating system compatibility. Start the computer and insert the ViewNX 2 Installer CD-ROM into the CD-ROM drive.
Page 99 The following software is installed: • ViewNX 2 (consisting of the three modules below) - Nikon Transfer 2: For transferring images to the computer - ViewNX 2: For viewing, editing, and printing transferred images - Nikon Movie Editor: For basic editing of transferred movies •...
Page 100: Transferring Images To The Computer
Import File using Nikon Transfer 2 and click OK. 2 Double-click Import File. If the memory card contains a large number of images, it may take a while for Nikon Transfer 2 to start. Wait until Nikon Transfer 2 starts. Connecting the USB Cable...
Page 101: Viewing Images
Transfer images to the computer. • Confirm that the name of the connected camera or removable disk is displayed in the “Source” panel in the Nikon Transfer 2 “Options” area (1). • Click Start Transfer (2). • At default settings, all the images on the memory card will be copied to the computer.
Page 102: Retouching Photographs
Using ViewNX 2 Retouching Photographs Click Edit in the ViewNX 2 toolbar. Image editing functions include tone compensation, sharpness adjustment, and trimming (cropping). Editing Movies Click Movie Editor in the ViewNX 2 toolbar. Movie editing functions include the ability to delete unwanted scenes. Printing Images Click Print in the ViewNX 2 toolbar.
Page 103: Recording And Playing Back Movies
Recording and Playing Back Movies You can record movies by simply pressing the b (e movie-record) button. 2 9 m 0 s 2 9 m 0 s 8 4 0 8 4 0 1 2 m 3 0 s 1 2 m 3 0 s In playback mode, press the k button to play a movie.
Page 104: Recording Movies
Recording and Playing Back Movies Recording Movies You can record movies by simply pressing the b (e movie-record) button. Color tones, white balance, and other settings are the same when recording movies as they are when taking pictures. Display the shooting screen. Movie option •...
Page 105: Camera Temperature
Recording Movies Notes About Movie Recording • Memory cards with an SD Speed Class rating of 6 or faster are recommended when recording movies (A 19). When using a memory card with a lower Speed Class rating, movie recording may stop unexpectedly.
Page 106 Recording Movies Movie Options and Maximum Movie Length Movie options (A 91) Internal memory (approx. 89 MB) Memory card (4 GB) d HD 1080pP 37 s 25 min (1920×1080) (default setting) e HD 1080p (1920×1080) 57 s 40 min f HD 720p (1280×720) 1 min 25 s 60 min p iFrame 540 (960×540)
Page 107: Changing Movie Recording Settings (The Movie Menu)
Recording Movies Changing Movie Recording Settings (the Movie Menu) Enter shooting mode M d button M D tab (A 11) The following settings can be changed. Movie Movie options Autofocus mode Option Description Select the desired movie option to record. The camera can record normal speed movies and high speed (HS) Movie options movies, which can be played back in slow motion or fast...
Page 108: Playing Back Movies
(A 31) and press the l button (A 32). Notes About Playing Back Movies • The COOLPIX S8200 is not able to playback movies recorded with another make or model of digital camera. • The histogram and shooting information are not displayed for movies (A 8).
Page 109: General Camera Setup
General Camera Setup This chapter describes the various settings that can be adjusted in the z setup menu. Set up Welcome screen Time zone and date Monitor settings Print date 2 9 m 0 s 2 9 m 0 s Vibration reduc tion 8 4 0 8 4 0...
Page 110: The Setup Menu
General Camera Setup The Setup Menu Press the d button M z (setup) tab (A 11) From the menu screen, select the z tab to display the Set up setup menu, and then you can change the following Welcome screen Time zone and date settings.
Page 111 The Setup Menu Option Description When set to Auto (default setting), if the camera detects camera shake or subject movement at the time of shooting, it automatically increases ISO sensitivity and shutter speed to reduce blurring. The r indicator glows Motion detection green when the camera detects camera shake and increases shutter speed.
Page 112 The Setup Menu Option Description When set to Auto (default setting), you can charge the camera’s battery by connecting the camera to a computer (provided that the computer is able to supply power). Charge by computer • When charging by computer, it takes more time to charge the battery than when using the Charging AC Adapter EH-69P.
Page 113: Reference Section
Reference Section The Reference Section provides detailed information and hints about using the camera. Shooting Using Easy Panorama (Shooting and Playback)..........E2 Using Panorama Assist ..................... E5 Playback Playing Back and Deleting Images Captured Continuously (Sequence) ..E7 Editing Still Images ....................E10 Connecting the Camera to a TV (Viewing Images on a TV).......E21 Connecting the Camera to a Printer (Direct Print) ........E23 Menus...
Page 114: Using Easy Panorama (Shooting And Playback)
Reference Section Using Easy Panorama (Shooting and Playback) Shooting With Easy Panorama Rotate the mode dial to Scene menu y, press the d Panorama Image mode button and select p Panorama (A 39). Select V Easy panorama and press the Panorama k button.
Page 115 Using Easy Panorama (Shooting and Playback) Press the shutter-release button all the way, and then remove your finger from the shutter-release button. • I is displayed to indicate the direction of camera movement. Move the camera slowly and straight in one of the four directions, and begin shooting.
Page 116: Playing Back Images With Easy Panorama (Scroll Playback)
Using Easy Panorama (Shooting and Playback) Playing Back Images With Easy Panorama (Scroll Playback) Switch to playback mode (A 30), display an image 1 5 / 1 1 / 2 0 1 1 1 5 : 3 0 1 5 / 1 1 / 2 0 1 1 1 5 : 3 0 captured using easy panorama in full-frame playback 0 0 0 4 .
Page 117: Using Panorama Assist
Using Panorama Assist Use a tripod for the best results. Set Vibration reduction (E67) to Off in the setup menu when using a tripod to stabilize the camera. Rotate the mode dial to Scene menu y, press the d Panorama Image mode button and select p Panorama (A 39).
Page 118 Using Panorama Assist Take the next picture. • Frame the next image so that one third of the frame overlaps the first image, and press the shutter-release button. • Repeat this process until the necessary 2 9 m 0 s 2 9 m 0 s number of images has been taken to 8 3 9...
Page 119: Playing Back And Deleting Images Captured Continuously (Sequence)
Playing Back and Deleting Images Captured Continuously (Sequence) Each series of images captured using the following settings is saved in a sequence. • Continuous shooting mode (A 50) • Scene mode (A 40) - Continuous - Sports - Pre-shooting cache - Pet portrait mode (when Continuous is selected) - Continuous H: 120 fps...
Page 120 Playing Back and Deleting Images Captured Continuously (Sequence) How Sequences Are Displayed on the Playback Screen When using thumbnail playback mode, images are displayed as shown below. 4/9/16-image thumbnails 72-image thumbnails When Sequence display options (E54) in the playback menu is set to Individual pictures, if you select images in a sequence when using full-frame playback mode or thumbnail playback mode, the F icon is displayed.
Page 121: Deleting Images In A Sequence
Playing Back and Deleting Images Captured Continuously (Sequence) Deleting Images in a Sequence If Sequence display options (E54) in the playback menu is set to Key picture only, press the l button to select a deletion method and delete the following images. •...
Page 122: Editing Still Images
• If no face is detected in an image, a copy cannot be created using the skin softening function (E14). • Edited copies created with the COOLPIX S8200 may not be displayed properly on another make or model of digital camera. It may also be impossible to transfer them to a computer using another make or model of digital camera.
Page 123 Editing Still Images Restrictions on Image Editing When an edited copy is further modified with another editing function, check the following restrictions. Editing function used Editing functions that can be added The skin softening, filter effects, small picture, or crop function can Quick retouch be added.
Page 124: Quick Retouch: Enhancing Contrast And Saturation
Editing Still Images k Quick Retouch: Enhancing Contrast and Saturation Quick retouch can be used to easily create retouched copies in which contrast and saturation have been enhanced. Copies created with the quick retouch function are saved as separate files. Select an image in full-frame playback mode (A 30) or thumbnail playback mode (A 31) and press the d button.
Page 125: I D-Lighting: Enhancing Brightness And Contrast
Editing Still Images I D-Lighting: Enhancing Brightness and Contrast D-Lighting can be used to create copies with enhanced brightness and contrast, brightening dark portions of an image. Enhanced copies are saved as separate files. Select an image in full-frame playback mode (A 30) or thumbnail playback mode (A 31) and press the d button.
Page 126: Skin Softening: Softening Skin Tones
Editing Still Images e Skin Softening: Softening Skin Tones The camera detects faces in images and creates a copy with softer facial skin tones. Copies created using the skin softening function are saved as separate files. Select an image in full-frame playback mode (A 30) or thumbnail playback mode (A 31) and press the d button.
Page 127 Editing Still Images Notes About Skin Softening Depending upon the direction in which faces are looking, or the brightness of faces, the camera may be unable to accurately recognize faces, or the skin softening function may not perform as expected. More Information See “File and Folder Names”...
Page 128: Filter Effects: Applying Digital Filter Effects
Editing Still Images p Filter Effects: Applying Digital Filter Effects Digital filter effects can be used to apply a variety of effects to images. The following effects are available. Copies created with the filter effects function are saved as separate files. Type Description Produce star-like rays of light that radiate outward from bright...
Page 129 Editing Still Images Confirm the effect, and press the k button. Preview • A new, edited copy is created. • To exit without saving the copy, press the multi selector J. Back Back Back Save Save Save • Copies created using the filter effects function are 1 5 / 1 1 / 2 0 1 1 1 5 : 3 0 1 5 / 1 1 / 2 0 1 1 1 5 : 3 0 indicated by the c icon displayed during playback.
Page 130: Small Picture: Reducing The Size Of An Image
Editing Still Images g Small Picture: Reducing the Size of an Image Create a small copy of the current image. This feature is useful for creating copies for display on Web pages or for e-mail attachments. The 640×480, 320×240, and 160×120 sizes are available.
Page 131: Crop: Creating A Cropped Copy
Editing Still Images a Crop: Creating a Cropped Copy Create a copy containing only the portion visible in the monitor when u is displayed with playback zoom (A 31) enabled. Cropped copies are saved as separate files. Rotate the zoom control to g (i) in full-frame playback mode (A 30) to zoom in on the image.
Page 132 Editing Still Images Image Size As the area to be saved is reduced, the image size (pixels) of the cropped copy is also reduced. When the image size of the cropped copy is 320 × 240 or 160 × 120, a black frame is displayed around the image, and the small picture icon A is displayed in the left of the monitor in playback mode.
Page 133: Connecting The Camera To A Tv (Viewing Images On A Tv)
Connecting the Camera to a TV (Viewing Images on a TV) Connect the camera to a TV to play images or movies back on the TV. If your TV is equipped with an HDMI jack, a commercially available HDMI cable can be used to connect the camera to the TV.
Page 134: Turn On The Camera
Connecting the Camera to a TV (Viewing Images on a TV) Set the TV’s input to external video input. • See the documentation provided with your TV for details. Press and hold the camera's c button and turn on the camera. •...
Page 135: Connecting The Camera To A Printer (Direct Print)
• If the AC Adapter EH-62F (available separately) is used, COOLPIX S8200 can be powered from an electrical outlet. Do not use any other make or model of AC adapter as it may cause the camera to heat up or malfunction.
Page 136: Connecting The Camera To A Printer
Connecting the Camera to a Printer (Direct Print) Connecting the Camera to a Printer Turn off the camera. Turn on the printer. • Check printer settings. Connect the camera to the printer using the included USB cable. • Be sure that plugs are properly oriented. Do not attempt to insert plugs at an angle, and do not use force when connecting or disconnecting the USB cable.
Page 137 Connecting the Camera to a Printer (Direct Print) The camera is automatically turned on. • When properly connected, the PictBridge startup screen ( 1 ) will be displayed in the camera monitor, followed by the Print selection screen ( 2 ). Print selec tion 1 5 / 1 1 2 0 1 1...
Page 138: Printing Individual Images
Connecting the Camera to a Printer (Direct Print) Printing Individual Images After properly connecting the camera to the printer (E24), follow the procedures described below to print an image. Use the multi selector to select the desired Print selec tion image and press the k button.
Page 139: Printing Multiple Images
Connecting the Camera to a Printer (Direct Print) Select Start print and press the k button. PictBridge 0 0 4 prints Star t print Copies Paper size Printing begins. • Monitor display returns to the screen shown in step 1 when printing is complete.
Page 140 Connecting the Camera to a Printer (Direct Print) Select Print selection, Print all images, or Print menu DPOF printing and press the k button. Print selection Print all images DPOF printing Paper size Print selection Select images (up to 99) and the number of Print selec tion copies (up to nine) of each.
Page 141: Menus
Connecting the Camera to a Printer (Direct Print) DPOF printing Print images for which a print order was created DPOF printing using the Print order option (E43). • When the screen shown on the right is 0 1 0 prints displayed, select Start print and press the k button to start printing.
Page 142: The Shooting Menu (For A (Auto) Mode, Continuous Shooting Mode)
The Shooting Menu (for A (Auto) Mode, Continuous Shooting Mode) • See “Changing the Image Size (Image Mode)” (A 71) for information about Image mode. • Other than the Continuous (E35), items share the same settings with A (auto) mode and continuous shooting mode, and the settings are saved in the camera’s memory even if the camera is turned off.
Page 143 The Shooting Menu (for A (Auto) Mode, Continuous Shooting Mode) Notes About White Balance • When hue is adjusted using the creative slider (A 67), this feature cannot be set. • Some settings cannot be used with other functions (A 73). •...
Page 144 The Shooting Menu (for A (Auto) Mode, Continuous Shooting Mode) Using Preset Manual Preset manual is used with mixed lighting or to compensate for light sources with a strong color cast when the desired effect has not been achieved with white balance settings like Auto and Incandescent (for example, to make images shot under a lamp with a red shade look as though they had been shot under white light).
Page 145: Metering
The Shooting Menu (for A (Auto) Mode, Continuous Shooting Mode) Metering Enter A (auto) mode or continuous shooting mode M d button M A or C tab M Metering The process of measuring the brightness of the subject to determine exposure is known as metering.
Page 146: Iso Sensitivity
The Shooting Menu (for A (Auto) Mode, Continuous Shooting Mode) ISO Sensitivity Enter A (auto) mode or continuous shooting mode M d button M A or C tab M ISO sensitivity When ISO sensitivity is increased, less light is needed when taking pictures. Higher ISO sensitivity allows darker subjects to be captured.
Page 147: Continuous Shooting
The Shooting Menu (for A (Auto) Mode, Continuous Shooting Mode) Continuous Shooting Enter shooting mode M d button M C tab M Continuous Select the desired continuous shooting option (only when using continuous shooting mode). Option Description While the shutter-release button is held all the way down, images are captured continuously at a rate of about 6 fps V Continuous (when image mode is set to P 4608×3456).
Page 148 The Shooting Menu (for A (Auto) Mode, Continuous Shooting Mode) Option Description Each time the shutter-release button is pressed, the camera takes 16 shots at a rate of about 30 fps and arranges them W Multi-shot 16 in a single image. •...
Page 149: Af Area Mode
The Shooting Menu (for A (Auto) Mode, Continuous Shooting Mode) AF Area Mode Enter A (auto) mode or continuous shooting mode M d button M A or C tab M AF area mode Use this option to determine how the camera selects the focus area for autofocus. Option Description When the camera detects a human...
Page 150 The Shooting Menu (for A (Auto) Mode, Continuous Shooting Mode) Option Description Select one of 99 focus areas in the Selectable focus area monitor. This option is suited to situations in which the intended subject is relatively still and not positioned in the center of the frame.
Page 151 The Shooting Menu (for A (Auto) Mode, Continuous Shooting Mode) Option Description When the camera detects the main subject, it focuses on that subject. Press the shutter-release button halfway to activate the focus area. When the shutter-release button is M Target finding AF pressed halfway, focus areas that suit (default setting) the size of the subject are displayed...
Page 152: Using Subject Tracking
The Shooting Menu (for A (Auto) Mode, Continuous Shooting Mode) Using Subject Tracking Use this mode to take pictures of moving subjects. When you register a subject, subject tracking begins and the focus area automatically follows the subject. Press the d button in A (auto) mode or continuous shooting mode.
Page 153 The Shooting Menu (for A (Auto) Mode, Continuous Shooting Mode) Press the shutter-release button the rest of the way down to take a picture. • The camera focuses on the focus area when the shutter-release button is pressed halfway. The focus area will glow green and focus will be locked.
Page 154: Autofocus Mode
The Shooting Menu (for A (Auto) Mode, Continuous Shooting Mode) Autofocus Mode Enter A (auto) mode or continuous shooting mode M d button M A or C tab M Autofocus mode Select how the camera focuses. Option Description A Single AF The camera focuses when the shutter-release button is pressed (default setting) halfway.
Page 155: The Playback Menu
The Playback Menu • For information about the following image editing features, see “Editing Still Images” (E10): - Quick retouch - D-Lighting - Skin softening - Filter effects - Small picture a Print Order (Creating a DPOF Print Order) Press the c button (playback mode) M d button M c tab M a Print order When printing images saved on the memory card using any of the following methods, the Print order option in the playback menu is used to create digital “print orders”...
Page 156: Select Whether Or Not To Print Shooting Date
The Playback Menu Select whether or not to print shooting date Print order and shooting information. • Select Date and press the k button to print the Done shooting date on all images. • Select Info and press the k button to print shooting Date information (shutter speed and aperture value) on all Info...
Page 157 The Playback Menu Print Date When shooting date and time are imprinted on images using the Print date option (E66) in the setup menu, images are saved with shooting date and time imprinted on the image when they are captured. Images with the date imprinted on them can be printed from printers that do not support printing of the date on images.
Page 158: Slide Show
The Playback Menu b Slide Show Press the c button (playback mode) M d button M c tab M b Slide show Play back images, saved in the internal memory or on a memory card, one by one in an automated “slide show.” Use the multi selector to select Start and Slide show press the k button.
Page 159: Protect
The Playback Menu d Protect Press the c button (playback mode) M d button M c tab M d Protect Protect selected images from accidental deletion. Select images to protect or cancel protection for previously protected images from the image selection screen. See “The Image Selection Screen”...
Page 160 The Playback Menu The Image Selection Screen When using one of the following features, a screen like Protec t that shown on the right is displayed when selecting images. • Print order > Select images (E43) • Protect (E47) ON/OFF Back •...
Page 161: Rotate Image
The Playback Menu f Rotate Image Press the c button (playback mode) M d button M c tab M f Rotate image Specify the orientation in which saved images are displayed during playback. Still images can be rotated 90 degrees clockwise or 90 degrees counterclockwise. Images that were saved in portrait (“tall”) orientation can be rotated up to 180 degrees in either direction.
Page 162: E Voice Memo
The Playback Menu E Voice Memo Press the c button (playback mode) M select an image M d button M c tab M E Voice memo Use the camera’s microphone to record voice memos for images. • For an image that has no voice memo, the voice memo recording screen is displayed;...
Page 163: Deleting Voice Memos
The Playback Menu Deleting Voice Memos Press the l button while the screen described in “Playing Voice Memos” is displayed. File will be deleted. OK? When the confirmation dialog is displayed, select Yes and press the k button. Only the voice memo will be deleted.
Page 164: Copy (Copy Between Internal Memory And Memory Card)
The Playback Menu h Copy (Copy Between Internal Memory and Memory Card) Press the c button (playback mode) M d button M c tab M h Copy Copy images between the internal memory and a memory card. Use the multi selector to select a copy Copy destination and press the k button.
Page 165 The Playback Menu Notes About Copying Images • JPEG-, MOV-, and WAV-format files can be copied. Files saved in any other format cannot be copied. • If voice memo (E50) are attached to images selected for copying, voice memos are copied with the images.
Page 166: C Sequence Display Options
The Playback Menu C Sequence Display Options Press the c button (playback mode) M d button M c tab M C Sequence display options Select the method used to display a series of images shot continuously (sequence; E7) when viewing them in full-frame playback mode (A 30) and in thumbnail playback mode (A 31).
Page 167: The Movie Menu
The Movie Menu Movie Options Enter shooting mode M d button M D tab M Movie options Select the desired movie option to record. In addition to normal speed movies, the camera can also record high speed (HS) movies (E57), which can be played back in slow motion or fast motion. Larger image sizes and faster movie bitrates mean higher image quality and larger movie file sizes.
Page 168 The Movie Menu HS Movie Option Description 1/4-speed slow motion movies with a 4:3 aspect ratio are recorded. • Max. recording time: 7 minutes and 15 seconds (playback time: 29 minutes) h HS 120 fps • Movie bitrate: 2.8 Mbps (640×480) •...
Page 169 The Movie Menu Recording Movies in Slow Motion and Fast Motion (HS Movie) HS (high speed) movies can be recorded. Movies can be played back in slow motion at 1/4 or 1/2 of normal playback speed, or played back in fast motion at a speed two times faster than normal speed.
Page 170 The Movie Menu Notes About HS Movie • Sound is not recorded. • When recording HS movies, zoom position, focus, exposure, and white balance are locked when the b (e movie-record) button is pressed to start recording. HS Movie Recorded movies are played back at about 30 frames per second. When Movie options (E55) is set to HS 120 fps (640×480) or HS 60 fps (1280×720), you can record movies that can be played back in slow motion.
Page 171: Autofocus Mode
The Movie Menu Autofocus Mode Enter shooting mode M d button M D tab M Autofocus mode Select the autofocus method used when recording normal speed movies. Option Description Focus is locked when the b (e movie-record) button is A Single AF pressed to start recording.
Page 172: The Setup Menu
The Setup Menu Welcome Screen d button M z tab M Welcome screen Select whether or not a welcome screen is displayed when the camera is turned Option Description The camera enters shooting or playback mode without None (default setting) displaying the welcome screen.
Page 173: Time Zone And Date
The Setup Menu Time Zone and Date d button M z tab M Time zone and date Set the camera clock. Option Description Set camera clock to current date and Date and time time. Use the multi selector to set the date and 2 0 1 1 time in the date screen.
Page 174: Time Zone
The Setup Menu Press K. Time zone • The travel destination screen is displayed. L o n d o n , C a s a b l a n c a 1 5 / 1 1 / 2 0 1 1 1 5 : 3 0 Home time zone Travel destination Press J or K to select the travel destination...
Page 175 The Setup Menu Time Zones The camera supports the time zones listed below. For time zones not listed below, set the camera clock to local time from the Date and time option. UTC +/– Location UTC +/– Location –11 Midway, Samoa Madrid, Paris, Berlin –10 Hawaii, Tahiti...
Page 176: Monitor Settings
The Setup Menu Monitor Settings d button M z tab M Monitor settings Set the options below. Option Description Select information displayed in the monitor during shooting and Photo info playback. See “Photo Info” (E65) for more information. Select from five settings for monitor brightness. The default Brightness setting is 3.
Page 177 The Setup Menu Photo Info Select whether or not the photo information is displayed in the monitor. See “The Monitor” (A 6) for information about indicators displayed in the monitor. Shooting mode Playback mode 1 5 / 1 1 / 2 0 1 1 1 5 : 3 0 1 5 / 1 1 / 2 0 1 1 1 5 : 3 0 0 0 0 4 .
Page 178: Print Date (Imprinting Date And Time)
The Setup Menu Print Date (Imprinting Date and Time) d button M z tab M Print date The shooting date and time can be imprinted on the images during shooting, allowing the information to be printed even from printers that do not support date printing (E44).
Page 179: Vibration Reduction
The Setup Menu Vibration Reduction d button M z tab M Vibration reduction Reduce the effects of camera shake while shooting. Vibration reduction reduces blur, caused by slight hand movement known as camera shake, which commonly occurs when shooting with zoom applied or at slow shutter speeds. The effects of camera shake are reduced when recording movies, in addition to when taking still pictures.
Page 180: Motion Detection
The Setup Menu Motion Detection d button M z tab M Motion detection Enable motion detection to reduce the effects of subject movement and camera shake when shooting still images. Option Description When the camera detects subject movement or camera shake, the ISO sensitivity and shutter speed are automatically increased to reduce blurring.
Page 181: Af Assist
The Setup Menu AF Assist d button M z tab M AF assist Enable or disable AF-assist illuminator, which assists autofocus operation when the subject is dimly lit. Option Description AF-assist illuminator will be used to assist the focus operation when the subject is dimly lit.
Page 182: Digital Zoom
The Setup Menu Digital Zoom d button M z tab M Digital zoom Enable or disable digital zoom. Option Description When the camera is zoomed in to the maximum optical zoom position, rotating the zoom control to g (i) triggers digital On (default setting) zoom (A 27).
Page 183: Sound Settings
The Setup Menu Sound Settings d button M z tab M Sound settings Adjust the following sound settings. Option Description Select On (default setting) or Off. When On is selected, a beep will sound once when operations are completed successfully, Button sound twice when the camera acquires focus on the subject, and three times when an error is detected.
Page 184: Auto Off
The Setup Menu Auto Off d button M z tab M Auto off If no operations are performed for a specified amount of time, the monitor turns off and the camera enters standby mode (A 21). Select the time allowed to elapse before the camera enters standby mode from 30 s, 1 min (default setting), 5 min, and 30 min.
Page 185: Format Memory/Format Card
The Setup Menu Format Memory/Format Card d button M z tab M Format memory/Format card Use this option to format the internal memory or a memory card. Formatting the internal memory or memory cards permanently deletes all data. Data that has been deleted cannot be restored. Be sure to transfer important images to a computer before formatting.
Page 186: Language
The Setup Menu Language d button M z tab M Language Select one of 29 languages for display of camera menus and messages. Czech Russian Danish Romanian German Finnish (default setting) Swedish Spanish Vietnamese Greek Turkish French Ukrainian Indonesian Arabic Italian Simplified Chinese Hungarian...
Page 187: Charge By Computer
• When the camera is connected to a computer, an application installed on the computer, such as Nikon Transfer 2, may start. If the camera was connected to the computer for the sole purpose of charging the battery, exit the application.
Page 188 The Setup Menu The Charge Lamp The following chart explains charge lamp status when the camera is connected to a computer. Charge lamp Description Blinks slowly Battery charging. (green) Battery not charging. If the charge lamp changes from slow blinking (green) to off while the power-on lamp is lit, charging is complete.
Page 189: Blink Warning
The Setup Menu Blink Warning d button M z tab M Blink warning Specify whether or not the camera detects human subjects that have blinked using face detection (A 76) when shooting in the following modes. • A (auto) mode (when Face priority (E37) is selected for AF area mode option) •...
Page 190 The Setup Menu The Blink Warning Screen When the Did someone blink? screen shown on the Did someone blink? right is displayed in the monitor, the operations described below are available. If no operations are performed within a few seconds, the camera automatically returns to shooting mode.
Page 191: Filmstrip
The Setup Menu Filmstrip d button M z tab M Filmstrip Allows you to select whether or not filmstrips are displayed when you rotate the multi selector quickly in full-frame playback mode (A 30). Option Description Image thumbnails are displayed in the bottom of the monitor when you rotate the multi selector quickly while viewing an...
Page 192: Reset All
The Setup Menu Reset All d button M z tab M Reset all When Reset is selected, the camera’s settings will be restored to their default values. Basic Shooting Functions Option Default value Auto Flash mode (A 56) Self-timer (A 59) Macro mode (A 64) Creative slider adjustment (A 65) Exposure compensation (A 67, 68)
Page 193 The Setup Menu Backlighting Menu Option Default value HDR (A 42) Pet portrait Menu Option Default value Pet portrait (A 43) Continuous Continuous Shooting Menu Option Default value Continuous (A 52) Continuous Special Effects Menu Option Default value Special effects (A 53) Soft Movie Menu Option...
Page 194 The Setup Menu Option Default value HDMI (E74) Auto HDMI device control (E74) Charge by computer (E75) Auto Blink warning (E77) Filmstrip (E79) Others Option Default value Paper size (E26, E27) Default Frame interval for Slide show (E46) • Selecting Reset all also clears the current file number (E84) from memory. Numbering will continue from the lowest number available.
Page 195: Firmware Version
The Setup Menu Firmware Version d button M z tab M Firmware version View the current camera firmware version. C O O L P I X S 8200 V e r. x . x Back...
Page 196: File And Folder Names
• Files are saved in folders named with a folder number followed by an identifier: “P_” plus a three-digit sequential number for images captured in Panorama assist scene mode (e.g. “101P_001”; E5) and “NIKON” for all other images (e.g. “100NIKON”). When the number of files within a folder reaches 9999, a new folder will be created.
Page 197: Optional Accessories
Optional Accessories Rechargeable battery Rechargeable Li-ion Battery EN-EL12 1, 2 Charging AC adapter Charging AC Adapter EH-69P Battery charger Battery Charger MH-65 AC Adapter EH-62F (connect as shown) AC adapter Be sure that the power connector cord has been properly aligned in the power connector and battery chamber grooves before closing the battery-chamber/memory card slot cover.
Page 198: Error Messages
Error Messages Display Problem Solution O (blinks) Clock not set. Set date and time. Battery exhausted. Charge or replace the battery. 14, 16 Battery exhausted. Turn off camera, and allow battery to cool down before resuming use. After five seconds, this message will disappear, the monitor will Battery temperature is turn off, and the power-on...
Page 199 Memory card has not any images which need to be Format card? been formatted for use kept before formatting the in COOLPIX S8200. memory card. Select Yes and press the k button to format the memory card. • Select smaller image size.
Page 200 File cannot be viewed on this data. File not created with the camera. View file using a – COOLPIX S8200. computer or the devices used to create or edit this file. This file cannot be played back. No images available for –...
Page 201 Turn camera off, remove and reinsert battery, and turn Error has occurred in System error camera on. If error persists, camera’s internal 14, 21 contact retailer or Nikon- circuitry. authorized service representative. Check printer. After solving the problem, select Resume Printer error: check Printer error.
Page 202 Error Messages Display Problem Solution Check ink, select Resume, and press the k button to Ink error. – Printer error: check ink resume printing.* Replace ink cartridge, select Running out of ink or ink Resume, and press the k – Printer error: out of ink cartridge is empty.
Page 203: Technical Notes And Index
Technical Notes and Index Caring for the Product..........F2 The Camera......................F2 The Battery......................F4 Charging AC Adapter..................F5 Memory Cards .......................F5 Cleaning and Storage..........F6 Cleaning........................F6 Storage ........................F6 Troubleshooting............F7 Specifications............F15 Supported Standards..................F19 Index .................F20...
Page 204: Caring For The Product
Technical Notes and Index Caring for the Product The Camera To ensure continued enjoyment of this Nikon product, observe the following precautions when using or storing the device. Do Not Drop The product may malfunction if subjected to strong shock or vibration.
Page 205 • Images in the monitor may be difficult to see under bright lighting. • The monitor is lit by an LED backlight. Should the monitor begin to dim or flicker, contact your Nikon-authorized service representative.
Page 206: The Battery
Caring for the Product The Battery • Check the battery level before using the camera and replace or charge the battery if necessary. Do not continue charging once the battery is fully charged as this will result in reduced battery performance.
Page 207: Charging Ac Adapter
Caring for the Product Charging AC Adapter • The Charging AC Adapter EH-69P is for use only with compatible devices. Do not use with another make or model of device. • The EH-69P is compatible with AC 100-240 V, 50/60 Hz electrical outlets. When using in other countries, use a plug adapter (commercially available) as necessary.
Page 208: Cleaning And Storage
Cleaning and Storage Cleaning Avoid touching glass parts with your fingers. Remove dust or lint with a blower (typically a small device with a rubber bulb attached to one end that is pumped to produce a stream of air out the other end). To remove fingerprints Lens or other stains that cannot be removed with a blower, wipe the lens with a soft cloth, using a spiral motion that starts at the center of them and working...
Page 209: Troubleshooting
Troubleshooting If the camera fails to function as expected, check the list of common problems below before consulting your retailer or Nikon-authorized service representative. Power, Display, Settings Issues Problem Cause/Solution • Confirm all connections. 96, E75 • Off is selected for Charge by computer in the setup menu.
Page 210 Troubleshooting Problem Cause/Solution • Camera is off. • Standby mode for saving power: press the 2, 21 power switch, shutter-release button, c button, or b (e movie-record) button, or rotate the mode dial. Monitor is blank. • When flash lamp blinks, wait until flash has charged.
Page 211 Turn the camera off, remove and replace the battery, then turn the camera on again. In the event of continued malfunction, contact your retailer or Nikon-authorized service representative. Note that disconnecting the power source as described above may result in the loss of any data not saved to internal memory or the memory card at the time the problem occurred.
Page 212 Troubleshooting Shooting Issues Problem Cause/Solution 81, 84, Cannot switch to shooting E21, Disconnect HDMI cable or USB cable. mode. • When camera is in playback mode, press the c 9, 30 button or shutter-release button. No image captured when • When menus are displayed, press the d the shutter-release button button.
Page 213 Troubleshooting Problem Cause/Solution • The flash mode is set to W (off). • Scene mode with which the flash does not fire is selected. Flash does not fire. • Flash is not fully raised. Do not hold down the flash. •...
Page 214 Troubleshooting Problem Cause/Solution • The flash mode is set to W (off). • Flash window is blocked. • Subject is beyond flash range. Images are too dark • Adjust exposure compensation. 67, 68 (underexposed). 37, E34 • Increase ISO sensitivity. •...
Page 215 320 × 240 or smaller. Cannot zoom in on image. – • The COOLPIX S8200 may not be able to zoom in on images captured with another make or model of digital camera. • Voice memos cannot be attached to movies.
Page 216 Troubleshooting Problem Cause/Solution With some PictBridge-compatible printers, the PictBridge startup screen may not be displayed The PictBridge startup and it may be impossible to print images when screen is not displayed 96, E75 Auto is selected for the Charge by computer when the camera is option in the setup menu.
Page 217: Specifications
Specifications Nikon COOLPIX S8200 Digital Camera Type Compact digital camera Effective pixels 16.1 million Image sensor -in. type CMOS; approx. 16.79 million total pixels Lens 14× optical zoom, NIKKOR lens 4.5-63.0mm (angle of view equivalent to that of 25-350 mm...
Page 218 Specifications • 16M (High) [4608 × 3456P] • 16M [4608 × 3456] • 12M [4000 × 3000] • 8M [3264 × 2448] Image size • 5M [2592 × 1944] (pixels) • 3M [2048 × 1536] • PC [1024 × 768] •...
Page 219 Specifications Arabic, Chinese (Simplified and Traditional), Czech, Danish, Dutch, English, Finnish, French, German, Greek, Hindi, Supported languages Hungarian, Indonesian, Italian, Japanese, Korean, Norwegian, Polish, Portuguese (European and Brazilian), Romanian, Russian, Spanish, Swedish, Thai, Turkish, Ukrainian, Vietnamese One Rechargeable Li-ion Battery EN-EL12 (included) Power sources AC Adapter EH-62F (available separately) Approx.
Page 220 Approx. 55 g (2.0 oz) (excluding plug adapter) Weight For Argentina, Brazil, and Korea: Approx. 80 g (2.9 oz) Specifications Nikon will not be held liable for any errors this manual may contain. The appearance of this product and its specifications are subject to change without notice.
Page 221: Supported Standards
Specifications Supported Standards • DCF: Design Rule for Camera File System is a standard widely used in the digital camera industry to ensure compatibility among different makes of camera. • DPOF: Digital Print Order Format is an industry-wide standard that allows images to be printed from print orders saved on memory cards.
Page 222: Index
Index Symbols R E6 Backlighting W 42 g (tele) 27 Battery 14, 16 f (wide) 27 Battery chamber 3 b (e movie-record) button 4, 5 Battery charger 17, E85 d button 4, 5, 11, 37, 91, 94 Battery latch 3 k Apply selection button 5, 10 Battery level 20 A Auto mode 24, 36...
Page 223 Index Digital zoom 27, 95, E70 Direct print 81, E23 HDMI E74 D-Lighting 80, E13 HDMI cable 81, E21 DPOF F19 HDMI device control E74 DPOF print E29 HDMI mini connector 3 DSCN E84 Help 39 Dusk/dawn i 46 High-speed continuous 52, E35 Histogram 8, 67 Easy panorama 49, E2 HS movie 91, E57...
Page 224 Recording slow motion movies E57 Night portrait e 45 Red-eye reduction 57 Reset all 96, E80 Nikon Transfer 2 82, 83, 85 Number of exposures remaining 20, 72 Rotary multi selector 4, 5, 10 Rotate image 80, E49 RSCN E84...
Page 225 Index Sunset h 46 Target finding AF 37, E39 Thumbnail display 31 Time difference 94, E63 Time zone 94, E61, E63 Time zone and date 22, 94, E61 Tripod socket 3, F17 TV 81, E21 TV settings 95, E74 USB cable 81, 84, E24, E85 USB/audio/video output connector 81, 84, E23 Vibration reduction 94, E67...
Page 228 No reproduction in any form of this manual, in whole or in part (except for brief quotation in critical articles or reviews), may be made without written authorization from NIKON CORPORATION. CT1G02(11) 6MM10911-02 2011...

This manual is also suitable for:

26288

Nikon CoolPix S8200 Reference Manual

Parts of the Camera

Basic Operations

Step 1 Turn the Camera on

Quick Links

Need help?

Questions and answers

Related Manuals for Nikon CoolPix S8200

Summary of Contents for Nikon CoolPix S8200