Panasonic Lumix DMC-GH2 Operating Instructions Manual page 60

Connecting to other equipment
Slide show
)
(Z) Operation icon
Press Red button during one screen display.
,_/1_: Go to previous/next image (when Slide Show
is paused/when motion picture is played
back).
T: Finish the Slide Show and return to one
screen display.
[OK]: Pause.
[SUB MENU]: Go to Slide Show setting screen. 12
• To play back the audio of the motion pictures, set the [SOUND]
in the Slide Show setting screen to [AUTO] or [AUDIO].
il This is displayed only when 3D playback is possible.
i2 This is not displayed during 3D playback.
• Operation icons are hidden by pressing [RETURN], or if no operation is performed for a while
when the operation icons are displayed. Operation icons are displayed when one of the
following buttons is pressed while the operation icons are not displayed.
-A/V/_I/I_, [OK], [SUB MENU], [RETURN], Red button, Green button, Yellow button
• It is recommended to connect this unit to an HDMI terminal other than the HDMI1 if there are 2
or more HDMI input terminals on the TV.
• When the [VlERA Link] (P61) of this unit is set to [ON], operation using the button on this unit
will be limited.
• VlERA Link must be activated on the connected TV. (Read the operating instructions of the TV
for how to set etc.)
• If you are not using VlERA Link, set [VlERA Link] (P61) to [OFF].
• Other linked operations
Turning the power off:
If you use the remote control for the TV to turn off the power, the power on this unit also
turns off.
Automatic input switching:
• If you connect with a HDMI mini cable and then turn on the power on this unit, and then press
[_], the input channel on the TV automatically switches to this unit's screen. If the TV's power
is in standby status, it will turn on automatically (if [Set] has been selected for the TV's [Power
on link] setting).
• Depending on your TV's HDMI connection, on some TV's it may be necessary to manually
select the HDMI connection you are using. In this case, use the remote control for the TV to
switch the input channel. (For details on how to switch input, please read the operating
instructions for the TV.)
• if VIERA Link does not work properly, refer to page 191.
• If you are unsure whether or not the TV you are using are compatible with VlERA Link, read the
operating instructions for the TV.
• Available linked operations between this unit and a Panasonic TV are different depending on
the types of Panasonic TVs even if they are compatible with VlERA Link. Refer to the operating
instructions of the TV for the operations that are supported on the TV.
• Be sure to use a cable that is HDMI certified.
Always use a genuine Panasonic HDMI mini cable (RP-CDHM15, RP-CDHM30; optional).
Part numbers: RP-CDHM15 (1.5 m) (5 feet), RP-CDHM30 (3.0 m) (10 feet)
• Before attempting to use VlERA Link, be sure the camera is not connected to a PC or Printer.
• [HDMI MODE] (P6O) for this unit is determined automatically when the VlERA Link is operating.
160 VQT3A36