Panasonic Lumix DMC-GH2 Operating Instructions Manual page 146

Playback/Editing
• Editing in Burst Picture Group units
All pictures in the Burst Picture Group are edited at once.
• For Burst Picture Groups, the following editing menu can be used.
-[TITLE EDIT] (P143), [TEXT STAMP] (P144), [FAVORITE] (P149), [PRINT SET] (P150),
[PROTECT] (P151), [FACE REC EDIT] (P152)
1 Select the item on the [PLAYBACK] mode menu and then
press I_. (P55)
2 Press Air to select [SINGLE] or [MULTI] and then press
[MENU/SET].
3 Select an image with burst icon [1:_] _), and perform
editing.
• You can select multiple pictures from the Burst Picture Group and
other images by selecting [MULTI] in step 2.
For details on the various ways of editing, refer to "Using the
[PLAYBACK] Mode Menu" (P140).
• About display of [FAVORITE], [PRINT SET] and [PROTECT] icons during playback
of Burst Picture Groups.
If you set [FAVORITE] (P149), [PRINT SET] (P150) or [PROTECT] (P151) for any of the
pictures in the Burst Picture Group, the following icons will appear on the group top
screen.
Initial screen for Burst
Picture Group
(_) Total number of all pictures stored within the Burst Picture Group.
(i_ Number of pictures in given Burst Picture Group subject to a setting.
(_) Total number of prints set over all Burst Picture Groups.
®
• For example, if 3 pictures are to be printed from each of 2 burst pictures within the group,
a "6" will appear here.
• [CROPPING] and [ASPECT CONV.] is not possible at once on the burst picture group units.
• Pictures for which you have performed [TEXT STAMP], [CROPPING] or [ASPECT CONV.] will
be saved separately from burst pictures.
• If you delete all pictures except one, that picture will be saved as a single picture instead of as
a Burst Picture Group.
138 VQT3A36