Panasonic Lumix DMC-GH2 Operating Instructions Manual page 174

Connecting to other equipment
If you connect the camera to a printer supporting PictBridge, you can select the pictures to
be printed out and instruct that printing be started on the camera's LCD monitor.
• Burst pictures taken with burst speed set to [SH] will be displayed as a list, and not as a group.
• Some printers can print directly from the card removed from the camera. For details, refer to
the operating instructions of your printer.
Preparations: Turn on the camera and the printer.
Perform the print quality and other settings at the printer before printing the
pictures.
_) USB connection cable (supplied)
• Check the directions of the connectors, and plug them straight in or unplug them straight out.
(Otherwise the connectors may be bent out of shape which may cause malfunction.)
(_) Align the marks, and insert.
• Use a battery with sufficient battery power or the AC adaptor (DMW-AC8PP; optional) and DC
coupler (DMW-DCC8; optional). If the remaining battery power becomes low while the camera
and the printer are connected, the status indicator blinks and the alarm beeps. If this happens
during printing, step printing at once. If not printing, disconnect the USB connection cable.
_ Connect the to via the USB connection cable
camera
a
printer
®
(supplied).
• When the camera is connected to the printer, the cable disconnect prohibit icon [@]
appears. Do not disconnect the USB cable while [@] is displayed.
_ Press All' to select and then
[PictBridge(PTP)],
press [MENU/SET].
• Do not use any other USB connection cables except the supplied one. Use of cables other than
the supplied USB connection cable may cause malfunction.
• Turn the camera off before connecting or disconnecting the AC adaptor (DMW-AC8PP;
optional).
• Before inserting or removing a card, turn the camera off, and disconnect the USB connection
cable.
• Motion pictures recorded cannot be printed out.
166 VQT3A36